What is PERC H330 RAID controller?

PERC H330 supports real-time RAID monitoring and hardware inventory. Trusted Dell PERC reliability with minimal maintenance effort Eight-port 12Gbps PCI Express RAID controller supporting 3Gbps, 6Gbps and 12Gbps SAS, and 3Gbps and 6Gb/s SATA hard-disk or solid-state drives.

What does Dell PERC stand for?

PowerEdge™ RAID Controller
The Dell™ PERC (PowerEdge™ RAID Controller) family of enterprise-class controllers is designed for enhanced performance, increased reliability, fault tolerance, and simplified management — providing a powerful, easy-to-manage way to create a robust infrastructure and help maximize server uptime.

Which PERC 9 series cards can support RAID 6?

Series 9 family Note: All PERC 9 series cards support RAID 6 except for the PERC H330.

What is integrated RAID controller?

A RAID controller is a hardware device or software program used to manage hard disk drives (HDDs) or solid-state drives (SSDs) in a computer or storage array so they work as a logical unit.

What is PERC H730P adapter?

The PowerEdge RAID Controller (PERC) H730P, with eight internal ports, delivers two PowerPC processor cores and a 72-bit DDR3 interface that drives 2GB non-volatile cache memory. Deploy the PERC H730P in hard-drive-based server environments for significant performance gains.

How does a RAID card work?

A RAID card manages a PC’s hard disk drives or solid-state drives (SSDs) so that they work together and drive redundancy and/or performance. It can be hardware (a RAID card) or software. There are different types of RAID, as dictated by the Storage Networking Industry Association.

What does the P stand for in H730P?

The PowerEdge RAID Controller (PERC) H730P, with eight internal ports, delivers two PowerPC processor cores and a 72-bit DDR3 interface that drives 2GB non-volatile cache memory. PERC H730P supports real-time RAID monitoring and hardware inventory.

What is SAS controller?

SAS controllers enable the use of SATA drives to expand the storage capacity with cost-effectiveness. The use of SATA hard drives on SAS controllers is made possible by the fact that both share the same infrastructure and have similar features. SATA drives may be plugged into SAS controllers.

How does Dell iDRAC work?

The iDRAC is a piece of hardware that sits on the server motherboard that allows Systems Administrators to update and manage Dell systems, even when the server is turned off. The iDRAC also provides both a web interface and command line interface that allows administrators to perform remote management tasks.

What are the specs of a Dell PERC H330?

specs 1 Interface SATA 6Gb/s / SAS 12Gb/s 2 Supported Devices disk array (RAID), hard drive, solid state drive 3 Channel Qty 8 4 Data Transfer Rate 12 Gbps 5 Processor LSI LSISAS3008 6 Max Storage Devices Qty 128 7 RAID Level RAID 0, RAID 1, RAID 10, RAID 5, RAID 50

What kind of RAID card is PERC H330?

• PERC H330: The PERC H330 is a general purpose RAID solution card. The card is available in Adapter (low profile and full height), Mini Monolithic, and Mini Blade form factors for internal storage and tape devices. Figure 1. Features of PERC H330 adapter card 1 PERC H330 adapter 2 heat sink 3 SAS-cable connector

What kind of storage controller does Dell PERC use?

Dell PERC H330 – storage controller (RAID) – SATA 6Gb/s / SAS 12Gb/s – PCIe 3.0 x8 | 405-AADW

What does Dell iDRAC RAID controller H330 do?

• PERC H330 supports real-time RAID monitoring and hardware inventory. iDRAC incorporates Dell OpenManage Storage Services to provide the tools to efficiently manage PERC products, including a pre-boot setup utility and a full spectrum of online RAID management utilities.