How do I change settings in BIOS?

How to enter the BIOS on a Windows 10 PC

1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu.
2. Select Update & Security.
3. Select Recovery from the left menu.
4. Click Restart Now under Advanced startup.
5. Click Troubleshoot.
6. Click Advanced options.
7. Select UEFI Firmware Settings.
8. Click Restart.

How do you change BIOS settings on a HP laptop Windows 10?

After your PC boots back up, you will be met with a special menu that gives you the option to “Use a device,” “Continue,” “Turn off your PC,” or “Troubleshoot.” Within this window, select “Advanced options” then select “UEFI Firmware Settings.” This will allow you to enter BIOS on your Windows 10 PC.

Is changing BIOS setting safe?

But be careful in your BIOS or UEFI settings screen! You should only change settings if you know what they do. It’s possible to make your system unstable or even cause hardware damage by changing certain settings, especially ones related to overclocking.

How do I check BIOS settings?

Method 2: Use Windows 10’s Advanced Start Menu

1. Navigate to Settings.
2. Click Update & Security.
3. Select Recovery in the left pane.
4. Click Restart now under the Advanced startup header. Your computer will reboot.
5. Click Troubleshoot.
6. Click Advanced options.
7. Click UEFI Firmware Settings.
8. Click Restart to confirm.

How do I change my BIOS to UEFI?

Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)

1. Access the BIOS Setup Utility.
2. From the BIOS Main menu screen, select Boot.
3. From the Boot screen, select UEFI/BIOS Boot Mode, and press Enter.
4. Use the up and down arrows to select Legacy BIOS Boot Mode or UEFI Boot Mode, and then press Enter.

How do I access HP UEFI BIOS?

As the computer reboots, press F11 continuously until the Choose an Option screen displays. From the Choose an Option screen, click Troubleshoot. From the Troubleshoot screen, click Advanced options. From the Advanced options screen, click UEFI Firmware Settings.

What are default BIOS settings?

Your BIOS also contains a Load Setup Defaults or Load Optimized Defaults option. This option resets your BIOS to its factory-default settings, loading default settings optimized for your hardware.

Should you always update BIOS?

In general, you shouldn’t need to update your BIOS that often. Installing (or “flashing”) a new BIOS is more dangerous than updating a simple Windows program, and if something goes wrong during the process, you could end up bricking your computer.

How do you access BIOS in hp?

The most common key is the Escape key. Turn on your laptop and tap the Escape key. You will see a list of other menus you can access and your BIOS will be one of them. The BIOS setting will be associated with the F10 key. Tap it to access BIOS on your HP laptop.

How do you fix BIOS?

Follow these 3 steps to fix Bios problems: 1. Download and run the Bios repair tool Advanced System Repair. 2. Click Scan to run an advanced error analysis on your computer. 3. When the scan finishes, click the Fix All button to automatically repair the problems found.

What is the BIOS setting?

The basic input/output system (BIOS) settings, located in the Unified Extensible Firmware Interface (UEFI) firmware, exist outside the operating system. They allow you to configure the underlying hardware settings of your computer, including which device will be used to boot the PC and in what order they will be polled.

What is hp BIOS utility?

HP Desktop PCs – BIOS Setup Utility Information and Menu Options This document is for HP and Compaq desktop computers. The BIOS (Basic Input Output System) controls communication between system devices such as the disk drive, display, and keyboard. Read this guide to open and navigate general BIOS menus and settings.