Useful tips

How do I reset my Dlink DIR 645?

by Rhyley Bryan

How do I reset my Dlink DIR 645?

Reset D-Link DIR-645 router to factory defaults

  1. Turn on router.
  2. Press Factory Reset button and hold for at least 15 seconds.
  3. Device restarts automatically.
  4. Default settings have been restored.

How do I reset my Dlink DIR 600m?

Locate the reset pin hole on the back of the DIR-600 as per below: 2. Insert a paperclip into the reset pin hole and hold in for 10 seconds. While holding in the reset button, refer to the Power LED, when it turns yellow/orange, release the paperclip holding in the reset button.

What happens if I reset my Dlink router?

Resetting your router will clear all your home networking settings and will change all of your settings back to the defaults. Ensure that the router is ON. Press & Hold down the Reset button with a paperclip for 10-15 seconds and release.

How do I reset my Dlink router manually?

How do I reset my router to factory default settings?

  1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
  2. Step 2: Hold the paper clip down for 10 seconds and release.
  3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
  4. Note:

How do I change my Dlink DIR 600m admin password?

How do I change the login password to my DIR router?

  1. Step 1: Open a web browser and enter the IP address of the router in the address bar (default is 192.168.
  2. Step 2: The default username is admin and the password is blank (nothing).
  3. Step 3: Click the Tools tab and then click Admin to the left.

How do I configure my Dlink 600m router?

Configuration for D-Link DIR-660

  1. Visit the router’s IP address (http://192.168.0.1) in a new browser window.
  2. Enter the router password.
  3. Click on the Manual Internet Connection Setup button at the bottom.
  4. Enter the OpenDNS addresses in and Secondary DNS Server fields.
  5. Click Save Settings button at the top.

How do I completely reset my router?

To reset your router:

  1. Locate the Reset button on the back of your router.
  2. With the router powered on, use the pointed end of a paperclip or similar object to press and hold the Reset button for 15 seconds.
  3. Wait for the router to fully reset and power back on.

How do I reboot my D-Link router?

Power OFF the device. Press and hold the ‘reset’ button; while doing so, power on the device again and keep holding the ‘reset’ button for another 10 seconds. Then release the button and wait until device restarts.

Where is the Reset button on D-Link router?

Locate the “Reset” button on the D-Link router. The Reset button is in a tiny hole adjacent to the WAN or Internet port on most D-Link models. Insert the paperclip into the Reset hole to press the button. Press and hold the Reset button for 10 to 15 seconds.

How can I reset my DLink router password?

10 Steps To Reset DLink Router Password

  1. Get the IP address of your router.
  2. Open a web browser from your computer and type the router’s IP address in the search field.
  3. When the login screen appears, click the drop-down menu and select the Admin option.
  4. Provide the administrator password and select OK.

Is the D-Link dir-645 a wireless router?

The D-Link DIR-645 Wireless N Router with SmartBeamTMtechnology is packed with a load of features. Most of these features are what is expected from an Internet Wireless router, and then there are the features that are unique to D-Link products.

What happens if I Reset my D-Link router?

Note: Do not hold the reset button for longer than 10 seconds, doing so could cause the router to go into a recovery mode (The Power light will flash or stay orange). If this happens, unplug the power from the router for 30 seconds. Note: Resetting the router does not reset the firmware to an earlier version.

Which is port 1 on the dir-645?

Don’t be fooled: Port 1 on the unit is number 3 when configuring VLANs. vlan0 = eth0.0, vlan1 = eth0.1 and so on. → hardware.button on howto use and configure the hardware button (s). The DIR-645 has two buttons. They are Reset and WPS. Here, we merely name the buttons, so we can use them in the above Howto:

How do I Reset my dir-816 router to factory default?

Step 1: With the unit on, place a paper clip into the hole on the back/bottom of the unit labeled Reset. Step 2: Hold the paper clip down for 10 seconds and release. Step 3: The lights on the front of the router should start to flash (The power LED may go off or turn orange) and then the device will reboot.