How is baseline process capability calculated?

The process capability is thus, defined as the ratio of the voice of the customer and voice of the process: Cp = (USL-LSL)/6σ. Long-term process capability cannot be the same as the short term.

What does a PPK of 1.33 mean?

Ppk < 1.33. The process is substandard for meeting customer. requirements. Process improvements must be given high. priority and documented in a corrective action plan.

What is Cpk and PPK in quality?

In the short sense, Cpk and Ppk are about process capability and process performance, respectively. Another way to look at the difference is that Cpk is used for a subgroup of data, while Ppk is used for the whole process.

What is a good process capability ratio?

Cpk = or >1.33 indicates that the process is capable and meets specification limits. Any value less than this may mean variation is too wide compared to the specification or the process average is away from the target.

How is process capability defined?

Process capability is defined as a statistical measure of the inherent process variability of a given characteristic. You can use a process-capability study to assess the ability of a process to meet specifications.

What is process capability with example?

Process Capability Example 1: The ice cream that must be served in an ice cream parlor has to be between -15 degrees Celsius and -35 degrees Celsius. The process of refrigeration that keeps the temperature has a standard deviation (SD) of 2 degrees Celsius. And the mean value of this temperature is -25 degrees Celsius.

What is a good PPK score?

According to Six Sigma philosophy, Cp or Pp and Cpk or Ppk should be greater than 1.50. From a technical standpoint, Six Sigma deems a process being acceptable only after achieving a maximum defect rate of 3.4 parts per million opportunities.

When do you do a baseline capability analysis?

Perform a baseline capability analysis on the process to determine the capability of a single process step (or data collection point) at the start of the project. A baseline analysis helps you set improvement goals for the project.

What’s the difference between PDB and process capability baseline?

Whereas the PDB contains data for each project, the process capability baseline represents a snapshot of the capability of the process at some point in time in quantitative terms.

What do you mean by process performance baseline?

Most of the company or people adopted CMMI best practices are familiar with the word “ Process Performance Baseline (PPB)” and certainly they will recollect the document with multiple PowerPoint pages consists of graphs and data tables.

When to use a capability analysis ( attribute ) report?

When measuring attribute, or counts, data use capability analysis (attribute) to determine whether the process is capable of producing output that meets customer requirements. Use a capability analysis (binomial) report to measure the stability of a single process step (or data collection point) over time.

https://www.youtube.com/watch?v=5w2ALtjWqGQ