How do you fix a Bostitch heavy duty stapler?

How to Fix a Jammed Heavy-Duty Stapler

1. Firmly grab the handle of the heavy-duty stapler.
2. Pull out the remaining good staple clip and set it aside.
3. Grab the jammed staple with the needle-nosed pliers and pull it out.
4. Insert the solid clip of staples back into the head of the stapler.

How do you unjam a Stanley Bostitch heavy duty stapler?

Warning

1. Disconnect the construction stapler from the air supply. Use a hammer and punch to do this.
2. Push the driver upwards and past the jammed staple. Do this by putting the punch at the tip of the driver, which you should see coming out of the nose.
3. Tap the hammer against the punch and the jam should clear.

How do you load a Bostitch heavy duty stapler?

Most of our staplers load using the simple, four-step process below.

1. Flip. Flip the stapler upside down and open the base away from the body.
2. Pull. Pull the magazine pusher back to expose the staple channel.
3. Drop. Drop the staples into the magazine channel with the points facing up.
4. Push.

How do I load a Bostitch heavy duty stapler?

How do you remove heavy duty staples?

How to Remove Heavy Staples

1. Set a stack of paper or box on a sturdy flat surface.
2. Slide the staple remover up to the staple while inserting the removal tooth or teeth under the staple’s center.
3. Press the staple remover handle down with one hand while holding the paper or box steady with the other hand.

What size are heavy duty staples?

With a 1/2-inch leg length, the premium staples are designed for heavy-duty staplers.

How do you get a stuck stapler out?

To start, open the stapler completely so that the top and bottom are in a horizontal line. Before attempting to use household objects, try giving the stapler a light shake to see if the staple will just fall out. If unable to shake the jammed staple out, try to staple a single sheet of paper while the unit is jammed.

How do you unstick a stapler?

Hold the top of the stapler magazine with two fingers and slowly, while maintaining firm pressure, start pulling the lid apart from the part of the magazine that holds the staple. Be careful not to do this too quickly, or the lid might again fly open, spraying the staples all over your office or desk.

Is the Stanley Bostitch b310hds an anti-bacterial stapler?

This heavy-duty stapler can smoothly staple up to 130 sheets at once, while No-Jam technology eliminates frustrating staple jams for a professional finish. The B310HDS features antimicrobial protection that reduces microbial growth, making it an ideal choice for frequent use and for sharing at the office.

Is there a way to unjam a Bostitch stapler?

Pliers allow you to really get a grip on the staplers you’re trying to extract from the stapler. They too may feature magnetic ends, making it easier to lift the staple out. Hopefully, this helps those of you who struggle with frequent staple jams. Have a Bostitch stapler you’re unable to unjam?

What should I do if my stapler is jammed?

If unable to shake the jammed staple out, try to staple a single sheet of paper while the unit is jammed. This could possibly force the jam outward, clearing the unit. If this does not work, try using any sizable tool or nearby accessory, try to fish out the jammed staple through the “front teeth” of the stapler. A pencil usually does the trick!

Are there any antimicrobial products in Bostitch office?

At Bostitch Office, we trust and strongly recommend our antimicrobial products to our own loved ones and to anyone looking for the best solution for their family, friends, students, and colleagues.