What thickness subfloor is recommended?

The recommended thickness of the plywood subfloor is governed by the spacing of the joists. Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

What is the minimum subfloor thickness?

about 5/8 inch
The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.

How thick should a bathroom subfloor be?

Make Sure Your Subfloor is Structurally Stable The installation guide for 1/4 inch HardieBacker recommends having wood subfloors made of 5/8 inch exterior grade plywood or OSB (oriented strand board) that is 23/32 inches thick.

What is the thickness of travertine?

about 1/2″
Travertine tiles are typically about 1/2″ thick, while pavers are much thicker, ranging from 1 1/4 – 2″ inches in thickness. Travertine tiles also usually have very square edges, allowing them to be installed seamlessly for a clean look.

Is it better to nail or screw subfloor?

Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.

What thickness is 23 32 plywood?

3/4-inch
Thicknesses

What can I use for subfloor under vinyl?

Plywood underlayment is a thin plywood material that is most commonly used under resilient flooring materials, such as vinyl and linoleum sheets and tiles.

What is the best material to use for subfloor?

Plywood
Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Is travertine tile good for outdoors?

Travertine Tile adds instant sophistication and understated elegance to outdoor environments. Selected for outdoor applications, travertine tiles are perfect for patios, pool surrounds, and stair treads. They can also be used as a design element to enhance a concrete deck or resurface an existing one.

Can you install travertine tile on plywood subfloor?

The intent is to install a base of thick (3/4″) plywood, onto which the Travertine would be installed. Is this possible? Advisable? Answer: In order to install thin (.5″ thick) Travertine Tiles on a plywood subfloor, you need two layers of plywood – totaling 1 1/8″ minimum – and then 1/4″ cementboard or Ditra on top of it.

What kind of flooring can I put over Platon?

Carpet, vinyl, laminate or hardwood can be installed over Platon and OSB or plywood subfloor. On fresh concrete you can install flooring as soon as you can walk on the slab.

What is the Platon membrane for concrete flooring?

Platon is a strong, double dimpled, 24 mil HDPE membrane. By using Platon over the concrete, an impermeable vapor barrier and air gap is created. This allows the concrete to breathe while keeping the floor dry. The finished floor is isolated from the cold concrete and becomes room temperature, not slab temperature.

What do you need to know about travertine tile?

Travertine is a natural stone tile, imported from many countries all over the world. Installing travertine is much like installing any other tile, though it is important to practice care. The installation steps include: preparation, laying the tile, and grouting it to keep it all together.