What oil should I use in my RX-8?

First, ensure its quality synthetic oil and secondly ensure that you use a 5w-30 SAE rating or higher depending on your climate. Black Halo Racing recognizes that the Mazda manual calls for a 5w-20, non-synthetic, oil to be used in the RX8.

How much oil do I put in my RX-8?

The total oil capacity of the RX-8 is around 7.5 litres but only around 4.5 litres of this actually sits in the sump. The remainder is split up laying in the coolers, cooler lines and the engine itself.

Does the RX-8 burn oil?

The RX-8 does burn oil. ​The RX-8 burns oil intentionally. After all, the engine seals are completely inside the combustion chamber! The only way to to lubricate the seals inside the combustion chamber is to inject oil (or have oil in the fuel, called premix).

What oil does a 2007 Mazda RX-8 use?

Engine Oil

Can I use synthetic oil in my rx8?

So the question remains, can you use Red Line Synthetic Oil in a rotary engine? -The answer is yes, and you would be wise to do so. One of the first major benefits of synthetic oil is a drop in temperature, as much a 5-7°F. The oil burns completely. It doesn’t leave behind carbon deposits.

How much oil do I put in my rx8?

Engine Oil

Why is the RX-8 unreliable?

No, it’s not just one part of the engine, it’s the whole thing, as the Renesis 1.3-liter rotary engine that powers this sports car is known to be a gas-guzzling, unreliable machine. Instead of pistons, the rotary engine uses rotors to operate, and over time, they tend to wear down.

Is the RX-8 a good car?

The Mazda RX8 is an amazing car it sounds great and looks good too. It’s comfortable for a sports car and it is so much fun to drive. The reliability is below average but not terrible. It isn’t very expensive to fix the car either.

What oil should I use for a Mazda RX-8?

Mazda recommends 5W-20 engine oils for North America and 5W-30 for outside America. Some owners will even go with 10W-40 or 20W-50 oils that are commonly used in the RX-7.

What is the best oil for a rotary engine?

Rotary Revs recommends a 10w40 Semi-Synthetic engine oil of good branding for use in your rotary engine.

Is synthetic oil good for rotary engine?

So the question remains, can you use Red Line Synthetic Oil in a rotary engine? -The answer is yes, and you would be wise to do so. The oil burns completely. It doesn’t leave behind carbon deposits. It doesn’t cause carbon locking of the rotor or sticking to the apex seals.

What kind of oil does a RX8 rotary use?

The RX-8 is new to me (I’ve had it for a month now), but the principles of lubrication are the same for any engine. That said rotaries are very demanding on oil as they burn a small amount of oil. This has two consequences: the oil must burn cleanly, and the oil must tolerate a high amount of carbon due to the burning.

Why is there no synthetic oil in Mazda RX8?

Thinner oils require the motor to work less hard during its operational process. The trade off is less protection of metal parts. Mazda’s decision to not suggest synthetic oil is due to the inability of them to test fully synthetic oil within the RENESIS motor. Unlike conventional oil, no two synthetic oils are created alike.

Why does my RX-8 Renesis engine need oil?

Your RX-8 Renesis engine needs oil to lubricate it’s bearings. This is important in order to avoid the harmful build-up of ash and carbon which can cause rotor apex seals and side seals to stick.

Is the Mazda RX-8 a rotary engine car?

Go! Go! At RX8 Performance we have a passion for the Mazda RX-8 and the unique Rotary Engine that powers it. Our focus is not spread across a broad model range, it’s an intense focus on a single platform and the constant development of what is already an excellent machine,