How do I connect my Amphenol connector?

1. Step 1 – Disassemble the Male Amphenol Connector.
2. Step 2 – Remove Cable Support.
3. Step 3 – Back Off Wire Screws and Remove Connector.
4. Step 4 – Strip Cable Insulation and Trim Wires.
5. Step 5 – Strip Wires and Wrap Ground Wire.
6. Step 6 – Insert Cable into Bottom of Connector.
7. Step 7 – Connect Wires to Male Connector.

What is a Amphenol connector?

The term Amphenol connector refers to various electronics connectors that are introduced, or made primarily by Amphenol Corp. MIL-DTL-26482 / MIL-C-26482, a circular bayonet connector. RJ21, used in aggregated telecommunications cabling. Micro ribbon, used in personal computer’s connection to printer or SCSI equipments.

What is a crimping tool?

What is a Crimp Tool? Crimp tools are a varied collection of devices used to join materials or components by pressing them together and creating a seal or crimp. One of the most common uses of crimping tools is the attachment of connectors to the end of electrical cables.

How do you disassemble an Amphenol cable?

Step 1 – Disassemble the Male Amphenol Connector. Remove the cable nut by unscrewing it. Figure 1: Male Amphenol connector with cable nut unscrewed. Remove the grommet by pulling it out of the connector body. Figure 2: Male Amphenol connector with cable nut unscrewed and grommet removed. Remove the connector body by unscrewing it.

How do you rewire an Amphenol power unit?

To rewire an Amphenol connector, the following tools are required. A female Amphenol connector, such as the one on an SAA Field Power Unit (SAAFPU) Remove the cable nut by unscrewing it. Remove the grommet by pulling it out of the connector body.

What are the different types of Amphenol PCD connectors?

Amphenol Pcd offers a varying range of Circular Connectors – Bulldog, MFM Simplex, Terrapin, and APeX Galley Connector, Circular. Bulldog, IP68 rated and RoHS compliant was specifically designed for harsh environment applications.

Where to put the screws on an amphenol connector?

Ensure the tightening screws on the male end of the Amphenol connector are loose. With the bottom of the male connector head facing up, insert the following wires: