Can you shorten a motorcycle brake line?

There shouldn’t be a problem with shortening the line, just make sure that you replace the brake fluid and bleed the brakes, because there’ll need to be less brake fluid in the line due to it’s shorter lenght.

How much do custom brake lines cost?

As mentioned, you should expect to pay around $150 to $200 for your steel brake line repair. The brake line cost of just the parts is usually between $30 and $50, with the rest of the cost being the labor involved. This range is the same for the cost to replace the rear and front brake lines.

What lengths do brake lines come in?

Automotive Brake Lines Most auto parts stores sell straight brake lines in standard lengths of 8″, 12″, 20″, 30″, 40″, 50, and 60″. Sometimes you’ll find it offered in a straight 72″ line.

Are stainless steel brake lines worth it?

Braided stainless steel brake lines can withstand the pressure associated with the brake system and don’t swell. As a result, their lifespan is much longer. Particularly for those who are racing and need optimal performance on a track, braided stainless steel brake lines are without question, a worthwhile investment.

How much does a full brake job cost?

A complete brake repair — one that includes pads, rotor and caliper replacement — typically averages between $300 and $800. However, depending on the make and model of your vehicle, you can easily spend more than $1,000 on a complete brake job.

What is the most common brake line size?

Brake lines are most often 3/16- or 1/4-inch diameter and, while there will be no pressure difference between the two, there will be a difference in the amount of fluid delivered.

What degree flare are brake lines?

The 45-degree inverted flare is the most common style of flare used in automotive hard lines like brake, fuel, and transmission fluid transfer.

Can you reuse brake lines?

Reuse or Replace the Fittings? If you’re working with a brake line kit you have the option of reusing fittings from the lines you’ve just removed. As a general rule, don’t.

Where to get the best brake lines for a motorcycle?

These kits have a wide assortment of fittings, clamps, and lines so that you can build the exact line that you need for your custom motorcycle. At Dennis Kirk, you will find the best selection of motorcycle brake lines, clutch lines and fittings for the lowest guaranteed prices.

How to make your own custom brake line?

Contact us. It can be challenging to make up your own brake lines from bulk hose and ends. Cut the hose, strip the housing, assemble the ends, and hope for no leaks. If you’re looking for a better option, you’ve found it. Using this simple order form you can specify your own hose length, end fittings, and bolt threads.

What do braided stainless steel brake lines do?

These custom made braided steel hoses are top quality, made for handling high pressure ratings and to improve your braking performance when compared to typical rubber brake lines. Braided stainless steel custom lines can be ordered in your choice of lengths, end fitting types and your choice of clocking for your fittings.

Can you build your own brake and CLUTCH LINES?

For an even more custom approach, you can use build your own brake and clutch line kits. These kits have a wide assortment of fittings, clamps, and lines so that you can build the exact line that you need for your custom motorcycle.