What are standard vanity sizes?

Standard widths for vanity cabinets are 24″, 30″, 36″, 48″, 60″ and 72″, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20″-21″. However,there are narrow depth options available which are usually 18”.

Is 36 too high for bathroom vanity?

The standard height for a bathroom vanity is about 30 to 32 inches. On the other hand, a comfort height bathroom vanity matches kitchen countertop height at 36 inches. Most adults prefer comfort height vanities, though the standard height is easier for children. It’s really up to you and your bathroom preferences.

What are standard vanity top sizes?

Standard vanity dimensions are typically between 18″ – 72″ wide, depending on how many sinks you have. The standard depth of a vanity is typically around 20″, but narrower options are available. The standard vanity height is 32″, but ranges from 30″ – 36″.

Does a double vanity add value?

Double vanities also add value to your home. While one sink is typical and essential, two sinks make your home more desirable and attractive to potential buyers. Often, the choice to buy one home over another is how practical the bathroom is; a double vanity definitely adds to that.

What is a good width for a double vanity?

60 to 72 inches
For double vanities, a width range of 60 to 72 inches is standard. Keep in mind that the vanity top should be about 1 inch wider and deeper than the cabinet itself.

Should bathroom mirror be same width as vanity?

In general, the average width of a single bathroom vanity will fall between 30” and 48”. Whatever length your single bathroom vanity measures, your bathroom mirror must be the same width if you want a cohesive vanity area design. There are some exceptions, but you can’t go wrong following this general rule.

Should vanity lights hang over mirror?

Vanity mirror lighting should never overhang the mirror. Make sure the fixture isn’t extended past the mirror to avoid down lighting, which will cast shadows on the face.

Can you use a kitchen cabinet as a bathroom vanity?

Kitchen cabinets and bathroom sink cabinets are not mutually exclusive, and can cross over if done correctly. Simply choose a kitchen cabinet then put a vanity tops on it to transform it into a bathroom vanity cabinet.

What are the best bathroom vanity tops?

Perhaps the most practical material for a bathroom vanity top is laminate. According to Consumer Reports, laminate countertops are “best for areas of heavy use but minimal abuse.”. Laminate utilizes a thin plastic material for the surface. This is pressed to more plastic, particleboard, or plywood for a durable base.

What are bathroom vanity tops made of?

The most common types of vanity tops are made of laminate, acrylic, and ceramic. Natural stone materials such as granite, marble, and slate are also utilized for vanity tops.

What is a vanity top?

Vanity tops are a classification of bath countertops that are pre-made. In other words, you don’t need a fabricator to come into your home, measure your space and custom-fabricate and install your countertop surface.