Why is my tire pressure light on when my tires are fine Subaru?

The TPMS signifies that one or more of your tires is not at the correct tire pressure. It’s time to pull out your tire gauge and pump, or find yourself a gas station.

Why does my air pressure light keep coming on?

When the TPMS warning light comes ON and stays ON, this indicates a low tire pressure condition in one or more tires. Remember that one or more of the tires may be low in pressure, so you should always check the pressure in all of your tires.

How do you reset the tire pressure light on a Subaru?

To perform a reset of the TPMS only takes a few moments. First, turn the ignition to the “ON” position without starting the vehicle. Now, press the “TPMS” button (which is found underneath the left side of the steering wheel) until You see the low tire pressure light blink several times and then release the button.

Can I drive with air pressure light on?

No, driving with the TPMS Light on is not safe. It means one of your tires is underinflated or overinflated. This can cause undue wear on the tire, potentially lead to a tire failure, and cause a blowout dangerous to you and other drivers on the road.

How do you know if your tire pressure sensor is bad?

Drive for a little bit. The light should go off as the sensor reads the new pressure levels. If the light stays on, you should have us check your tires for a leak or another issue that may not be immediately visible. If the tire pressure is stable, then it could be a bad sensor.

Where is the TPMS reset button on a 2014 Subaru Forester?

To reset the tire pressure monitor or tpms system in your 2014 subaru forester vehicle, turn the ignition key to the “on” position and depress the tpms button, usually located under the dash, until the tpms light blinks several times.

Is 30 PSI enough for tires?

Air pressure in tires is measured in pounds per square inch, or PSI; usually, the recommended pressure ranges between 30 and 35 PSI. Check the pressure first thing in the morning or wait at least three hours after driving; this provides sufficient time for them to cool back down.

What to do if your Subaru has a low tire pressure light?

Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/ or system resetting. If the light illuminates steadily after blinking for approximately one minute, promptly contact a SUBARU dealer to have the system inspected. The tire pressure monitoring system is NOT a substitute for manually checking tire pressure.

What does improper tire pressure on a Subaru mean?

Improper tire pressure, whether overinflated or deflated, place unnecessary stress on your rubber wheels. And while you may understand that the TPMS and tire pressure are correlated, you have your share of questions about this handy Subaru feature, but fortunately, we at Schaller Subaru have the answers:

When to check tire pressure on Subaru Outback?

If this light does not illuminate briefly after the ignition switch is turned ON or the light illuminates steadily after blinking for approximately one minute, you should have your Tire Pressure Monitoring System checked at a SUBARU dealer as soon as possible.

What does the low tire pressure warning light mean?

When a spare tire is mounted or a wheel rim is replaced without the original pressure sensor/transmitter being transferred, the Low tire pressure warning light will illuminate steadily after blinking for approximately one minute. This indicates the TPMS is unable to monitor all four road wheels.