Which fuse is for the interior lights?
Which fuse is for the interior lights?
Registered. It is Fuse #29 or #30. If it is not blown when you check it, disconnect the battery for 20 mins and then connect it.
Where is the dome light fuse?
Depending on how your car is set up, your fuse box may be located in or near the glove box, under the dashboard, or in the engine compartment. Some cars even have more than one fuse box, so your owner’s manual can be very useful in locating the right one.
Why are my interior lights not working?
If you notice that all the lights in the interior are not working yet the radio or stereo still work, it’s a sign that a blown fuse could be the problem. You’ll need to access the car’s fuse box, which is either located inside the engine bay or under the dashboard, depending on the model.
What is the EFI fuse?
cheaper than a fist full of blown fuses. EFI fuse powers your circuit opening relay,fuelpump and sender,O2 sensors, IAC valve,MAF meter, VSV for EGR, VSV for EVAP, VSV for pressure sensor, ECM, and Point side of the EFI relay.
What is the AM2 fuse for?
The part that switches the gate to engage the starter. When you turn your car ON, the ignition switch is ON. Everything works. When you hit START the ign switch gate flips, and it starts drawing power from the AM2 circuit.
Why won’t my 2013 Dodge Dart start?
While there are a variety of reasons your Dodge Dart won’t start, the most common 3 are a dead battery, an alternator problem, or failed starter.
Where is the ignition fuse on a 2013 Dodge Dart?
It is located on the driver’s side under the instrument panel.
Why wont my lights turn off inside my car?
The likely cause of a dome light not turning off is either the dashboard light control knob being activated accidentally or a broken door switch. You can remove the wire from the door switch, if you are able to access the backside of the switch. The wire pulls off of the switch easily.
How do you fix a dome light problem?
Typical problems with dome lights include burnt-out bulbs and blown fuses.
- Inspect the dome light switch in front of the dome light fixture.
- Replace the bulb if the dome light still does not work.
- Replace the fuse if replacing the bulb does not work.