What is the default password for a DrayTek router?

The IP address for the Draytek routers available from Gradwell is 192.168. 1.1 (as below). You will then be directed to the web interface for the device and you will need to log in. The default Username for the device is ‘admin’ and the default password will be the same (see below).

How do I log into my Vigor router?

How to login my Vigor Router

1. Connect a computer to one of the router’s LAN ports by an Ethernet cable.
2. Make sure the network interface is using an IP in the 192.168.
3. Open a browser on the computer.
4. After logging in, you will access the management page of the router.

How do I find my DrayTek WIFI password?

Enter the default Wi-Fi password printed on the back of the product. Then, you should be connected to the routers’ LAN. To change the password, please log in to your Vigor Router or VigorAP, and change the security settings at Wireless LAN >> Security page.

How do I change my DrayTek router password?

To change the router’s admin password, the process is similar for most models. Go to [System Maintenance] > [Admin Setting]. Enter the existing password in the Old Password box, then put the new password in both the New Password and Confirm Password boxes. Click OK to apply the change.

How do I connect my DrayTek router to the Internet?

Access the DrayTek router’s web interface via your web browser, which will be accessible on http://192.168.1.1 by default. Enter the username of “admin” and the default password of “admin”. 2. Browse to [WAN] > [General Setup], click [WAN1] and set the VLAN Tag insertion (VDSL2) setting to Enable.

What is the default IP of DrayTek router?

Instructions to find your DrayTek router’s IP address. Most DrayTek routers have a default IP address of 192.168. 1.1. The IP address is required when accessing the DrayTek router’s web interface to configure it.

How do I reset my DrayTek 2860?

By Hardware Reset Button With the router powered on (ACT LED blinking), press the Factory Reset button with a pin, hold a few seconds until the ACT LED starts blinking rapidly, then release the button. After that, the router will restart with the default configuration.

How do I change the admin on my wifi network?

How to Change Your Router’s Login Information

1. Enter your router’s IP address into your favorite web browser.
2. Log in with the default username and password (both admin, usually).
3. Go to settings.
4. Select Change Router Password or a similar option.
5. Enter the new password.
6. Save the new settings.

Is Talk Talk ADSL or VDSL?

TALKTALK Wireless AC1200 Dual Band VDSL ADSL Modem Router.

What’s the default password for my vigor router?

The default login username and password are both admin. (If you can’t open the login page, see Why can’t I access my Vigor Router? to troubleshoot) NOTE: For older models, the default username and password might be admin / (blank), (blank) / (blank), or draytek / 1234.

What can the vigor2860 series of routers do?

Vigor2860 Series can act as a Central Management portal for all the Vigor devices on the network, including VigorAPs, Vigor Switches, and even Vigor Routers.

How to login my vigor router you DrayTek?

For older models, the default username and password might be admin / (blank), (blank) / (blank), or draytek / 1234. If the router was provided by your ISP, the login username and password could be different from a retail product. Then, please contact your ISP for the login credentials. 4.

What does the vigor2860 trunking tunnel do?

The two trunking tunnels can be set up in load balancing or failover mode. Vigor2860 Series can act as a Central Management portal for all the Vigor devices on the network, including VigorAPs, Vigor Switches, and even Vigor Routers.