Do KMC chains come with Quick Link?

Chain cleaning: A complete guide from lazy to obsessive A little-known fact is that KMC offers both reusable and non-reusable quick links for 10 and 11-speed chains. The packaging will detail which is which, or otherwise, a close look at the link itself will tell you what you’re dealing with.

Is KMC Quick Link compatible with Shimano?

Yes, KMC constructs Missing Link I, II, 9, and 10 for 7.3mm, 7.1mm, 6.6mm, and 5.9mm respectively; all Missing Links are compatible with Sram, Shimano, and Campy equivalent chains. Yes, both KMC X9SL and X10SL are compatible with Sram, Shimano, and Campy equivalent chains.

Which KMC chain is the best?

KMC Chains are more expensive than the Shimano counterpart. KMC Chains are compatible with other speeds – the most popular choice being the 10 speed. Their latest chain, the KMC X11SL DLC, is expensive and raises some questions if this cost is justifiable for any of the advantages gained.

Are chain Quick Links universal?

Shimano, SRAM and KMC quick links are designed for single use. Once installed, if you open the link to remove and clean the chain, for example, you should install a brand new quick link. That’s because the act of locking these quick links removes material weakening them.

When should a KMC chain be replaced?

When the elongation reaches 1%, it is the time to change your chain. The easiest way to check chain wear down is when you feel the chain has lost its smooth running and agile shifting function.

Can you reuse a chain Quick Link?

The quick link is designed for use with 11-speed chains and is, according to Shimano, not reusable. Quick links are dead easy to install. Place the quick link into the chain gap, align and snap together – usually done by applying pressure through the cranks.

Are expensive bike chains worth it?

No. The only advantage of expensive chains within a specific brand is the minor reduction in weight. The ones with extra plating do look nicer and provide some corrosion resistance, but it takes almost no effort to keep your chain rust free.

Who is the manufacturer of the KMC chain link?

The seller does say up front, “Manufactured by HJC NORTHEAST INC.” They are even stamped KMC in the metal. Well, using Park chain link pliers and over an hour spent with three of them and the correct KMC chain, had to give up. One was even visibly bent slightly out of the bag. AVOID. When you look at your order, it says No Returns.

How to remove a KMC missing link without the tool?

In this video, I’m gonna show you how you can remove a KMC missing link without a tool. First, you will need a wire hanger to select the part where the missing link is. It will release the tension of your chain and make your job easier. After that, hook a cable around the missing link, the way I show you in the video.

What’s the best way to use a quick link?

Insert the links through the chain’s open ends so they oppose each other. Pay close attention to any markings on the quick link. Some, such as on Shimano’s SM-CN900 or SRAM, will offer an arrow to point in the direction of chain travel.

Can you mix and match 10 speed quick links?

Ten-speed users can also openly mix and match between 10-speed chain manufacturers and 10-speed quick links. However, do beware that Campagnolo 10-speed chains are narrower and require specific links, something offered by both KMC and Wippermann.