How do I login to my Belkin router?

1. Connect to your network. Use your mobile device or computer to connect to the wireless or wired network being broadcast by your Belkin router.
2. Visit the Belkin router login IP. Open your favorite web browser and visit the default Belkin login IP address: 192.168.2.1.
3. Enter the login password.
4. Change the default password.

Why can’t I access my Belkin router?

Make sure that the ethernet cable (RJ45) connecting your Belkin router and computer is not busted. If you are still unable to access the router’s web-based setup page, try using another ethernet cable. NOTE: If you are accessing 192.168. 2.1 via wireless connection, make sure that you are connected to your own Wi-Fi.

What is my Belkin router IP address?

192.168.2.1
NOTE: The default IP address of a Belkin router is 192.168. 2.1.

How do I find my Belkin router password?

Locate the reset button on the back of your Belkin router if you cannot log in to the dashboard at all. Press and hold the button for 15 seconds. This will reset your admin and Wi-Fi password and all router settings, so you will have to log in to the dashboard and customize settings to your needs.

How do I change my Belkin router name and password?

1. Open a web browser. Open any web browser of your choosing (Chrome, Firefox, etc).
2. Access the router web interface. In the address bar, navigate to http://router or use the IP address of your router.
3. Access WiFi settings. Once you’ve logged in, select Security in the left-hand navigation panel.
4. Set a new WiFi password.

What happens if I reset my Belkin router?

Resetting your Belkin router is a helpful workaround especially if the device does not work as expected. However, once you reset the router, all the settings and configurations that have been previously saved on your router will be removed. This means that you will need to set up the router again.

How do I reset a Belkin router password?

How do I access my Belkin wireless router?

Go to command promt and type ipconfig. You will get the ip address of your computer as well as the default gateway address under Ethernet adapter Local Area Connection. Type that default gateway address in your browser, you will get the belkin page. You can use default username and password as admin to access the page.

What is the password for a Belkin router?

By default, all Belkin routers’ default username and password is admin (username) while “blank” (leave it blank) for the password.

How can I Reset my Belkin password?

When you’ve forgotten your Belkin router password, the easiest way to bring it back to its factory settings is to perform a hard reset. According to the Belkin support website, a hard reset is simple — turn the power on and hold down the “Reset” button for 15 seconds. The location of the button may vary by router model,…

How do I Change my Belkin router name?

If you want to change your network name then you have to go to your belkin router login page from there you can change your network name. to login to belkin router you have to type default IP in the url bar and after that login page opens type your username and password ( default one ).

https://www.youtube.com/watch?v=V-1rq37szqs