Articles

How to access the Configuration menu on the lexmark?

by Rhyley Bryan

How to access the Configuration menu on the lexmark?

Power the printer off. While holding down both the button and the button on the printer’s operator panel, power the printer back on. When you see Performing Self Test or the clock graphic on the printer display, release both buttons. Once the printer has finished warming up, you will be in the configuration menu.

How do I reset my Lexmark t654dn?

You may want to do a restore to factory by holding in select (checkmark) and right arrow then turning on the printer and releasing the buttons after about ten seconds to gain access to the service menu. From there you can reset the printer back to factory.

Where is the menu button on Lexmark printer?

Press the Menu ( ) button on the printer operator panel. Press the down arrow button ( ) until the check mark on the left is in front of Reports. Press the select ( ) button once….Solution.

Step Action
2 Make sure there is paper loaded in the paper tray.
3 Press the Menu ( ) button on the printer operator panel.

How do I reset my Lexmark printer to factory settings?

➜ How To Reset Factory Default Settings for Lexmark Printers:

  1. Press the Menu > button on the operator panel until Utilities Menu (or Tests Menu) appears on the display.
  2. Press the Select button once to enter the menu.
  3. Press the Menu > button until Factory Defaults appears on the display.
  4. Press the Select button.

How do I unlock my Lexmark printer?

Hold the ‘Go’ and ‘Stop’ buttons while powering on the printer, which will lock or unlock the control panel.

What is NPA mode?

Purpose: To specify whether the printer performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.

How do I print a Lexmark configuration page?

From the printer control panel, press System. Press or repeatedly until Information Pages appears, and then press OK. Press or repeatedly until Configuration appears, and then press OK. After the configuration pages print, Select Function will appear on the display.

How do you reset your printer settings?

1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”

How do I reset my Lexmark ms310dn to factory settings?

From the home screen, touch Settings > Device > Restore Factory Defaults > Restore Settings > Restore all settings > RESTORE > Start.

What is the default password for Lexmark printers?

There is no default password and no alternative password. If you are prompted for a password, someone has gained entry to the embedded web applet and has either accidentally or deliberately set a password on the adapter.

What is a PCL Smart Switch?

PCL SmartSwitch Set the printer to switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.

How do I print a Lexmark test page?

Solution

  1. Make sure the printer is at Ready or in Power Saver mode.
  2. Press the left (<) or right (>) arrow Menu button until you see UTILITIES MENU as a choice.
  3. Press the Select button.
  4. Press the left or right Menu button to cycle through these choices until Print Menus appears.
  5. Press the Select button.

How to print configuration pages in Lexmark T650?

– Use the down arrow to scroll down through the options until Reports is the active choice. – Press the button with the check mark on it (in between the four arrow buttons). – If Menu Settings Page is not the active choice, use the down arrow to scroll down until it is. – Press the button with the check mark on it.

How to configure TCP / IP settings via Lexmark support?

Action 1 Press the Menubutton. 2 Press next to Network/Ports. 3 Press next to Std Network. 4 Press next to Network Setup. 5 Press next to TCP/IP. 6 Press next to the IP Address. 7 Using the number pad or arrows on the device, configure your static IP address. Example: Press to count down from 255. Press to count up from 0. 8

Is the Lexmark t654dn operated by Lexmark?

Third-party vendor sites are not operated by Lexmark and are subject to their own data collection and privacy practices. The ultimate departmental workhorse, the Lexmark T654dn offers maximum power, flexible paper handling, low running costs and a solutions-ready framework for endless workflow possibilities!

What is job waiting feature on Lexmark t654dn?

The innovative Job Waiting feature will simply hold that job aside, letting others go on working without interruption (requires the hard disk option). The best in black and white: paper-saving duplex standard, a rich selection of paper handling accessories, and economical extra-high-yield 36,000*-page replacement cartridges.