How do you cut quarter sawn wood?

Quarter sawing gets its name from the fact that the log is first quartered lengthwise, resulting in wedges with a right angle ending at approximately the center of the original log. Each quarter is then cut separately by tipping it up on its point and sawing boards successively along the axis.

What is quarter sawn Milling?

Quartersawn lumber comes at a premium due to the labor it takes to mill each plank. To mill quarter sawn wood, each log is sawed at a radial angle into four quarters. Then each quarter is plain sawn. This method of quarter sawing does leave some waste, but much less than rift sawn lumber.

How is tangential sawing done?

Tangential sawing: The sawing is done at right angles to the medullary rays and tangential to the annular rings. Due to the cutting of the medullary rays, the sections cut become weaker.

Is quarter sawn wood stronger?

Quartersawn wood is generally much stiffer across the grain than flatsawn wood, and for instrument tops this may be advantageous.

Why is Quarter Sawn more expensive?

Quarter sawn wood is more expensive because it is more labor intensive to produce and the manufacturing process produces more waste than plain sawn lumber. At the sawmill, each log is sawed at a radial angle into four quarters, hence the name, then each quarter is plain sawn.

Is rift sawn or Quarter Sawn more expensive?

It is the most difficult grain pattern to achieve – particularly in wider widths – and therefore, more expensive than even Quarter Sawn. Rift and/or Quarter Sawn is a premium cut and is generally more expensive than Plain Sawn. It is also considered more stable because of the vertical grain orientation.

What are the disadvantages of quarter sawing?

Quarter sawn wood is more expensive because it is more labor intensive to produce and the manufacturing process produces more waste than plain sawn lumber.

What are the disadvantages of live sawing?

Live-sawing produces a high percentage of quarter-sawed boards, and boards with heartwood centers and sapwood edges. This may cause greater than normal degrade losses during air-drying and kiln-drying.

Why do you need a quarter saw in a sawmill?

Quarter-sawing your valuable hardwood logs will bring out the stability and the natural beauty of the boards, and maximize their value and your profits. In this fun video, learn what to look for in quarter-sawn lumber and how to use your portable sawmill to maximize your yield of quarter-sawn boards.

What do you mean by quarter sawn lumber?

Quarter sawn lumber refers to the angle at which the tree’s growth rings intersect the face of the sawn board. Although there are differing opinions on the term, fully quarter sawn lumber is generally defined as growth rings that are 80 to 90 degrees to the face of the board.

What kind of growth rings does quarter sawn lumber have?

Although there are differing opinions on the term, fully quarter sawn lumber is generally defined as growth rings that are 80 to 90 degrees to the face of the board. The quarter sawing method can also produce rift sawn lumber which is considered to have growth rings that are 45 to 80 degrees to the face of the board.

What are the different uses for plain sawn, rift sawn and quarter sawn?

For more information about the resulting lumber and its application you can look here: What are the different uses for plain sawn (flat sawn), rift sawn, and quarter sawn boards? In its basic form quarter sawing is a method of processing logs into lumber. It is one of 3 common methods: quarter, plain/flat, and rift sawing.