What size are spline lug nuts?
What size are spline lug nuts?
Cone Seat – Spline Drive Lug Nuts
| Part No | Thread Size | Hex Size |
|---|---|---|
| 65302 | 22mm | |
| 65310 | M14 x 1.5 | 22mm or 1.00 |
| 65310BK | M14 x 1.5 | 22mm or 1.00 |
| 65315 | M14 x 1.5 | 22mm or 1.00 |
What are spline lug nuts for?
These lug nuts are the perfect addition to your new wheels. The ultra-thin spline drive design is ideal for small diameter lug holes found on aftermarket wheels. They feature a closed end design, more gripping power, a larger seating surface and extended stud engagement. Don’t risk scratching your new wheels!
What do m14x1 5 lug nuts fit?
Fits: Most vehicles with 14×1. 5 wheel studs and aftermarket wheels that accept an ET style 60 degree conical seat lug nut.
Are all spline lug nuts the same size?
To our knowledge, there are only two sizes of 6-Spline nuts (with symmetrical or evenly spaced splines). If your 17mm, 18mm, 19mm, 11/16″ or 3/4″ socket (either Hex or 12-point) fits over your 6-Spline Nut, then you need the Small 6-Spline Key.
Are all 7-spline keys the same?
Since there are different sizes of keys available in the 7-spline family, it is important to get keys that match the specifications or your lug nuts.
What’s the difference between lug nuts and bolts?
Lug Bolt. A lug bolt features a threaded stem attached to a tapered head. Unlike a lug nut, where the bolt threads onto the wheel stud that is fixed onto a hub, a lug bolt threads onto the hub. A lug bolt, bolts the wheel and brake rotor directly onto the hub.
Can you get replacement locking wheel nut key?
Purchase a new key. This is sometimes the easiest option although it can sometimes be expensive. However if you’d like to use the original locking wheel nut set you’ll need to buy a new locking wheel nut key. Each key comes with a code so you can order a replacement from the vehicle manufacturer.
How tight should lug nuts be torqued?
New wheels should be re-torqued after the first 50 to 100 driving miles.
| Hardware Bolt or Stud Size | Typical Torque Range in Ft/Lbs | Minimum Number of Turns of Hardware Engagement |
|---|---|---|
| 14 x 1.25 mm | 85 – 90 | 9 |
| 7/16 in. | 70 – 80 | 9 |
| 1/2 in. | 75 – 85 | 8 |
| 9/16 in. | 135 – 145 | 8 |
What lug nuts are best?
Gorilla Guard 61681. Make sure this fits by entering your model number.
Are locking lug nuts effective?
Locked lug nuts can also lead to over-tightening and this can lead to broken studs, according to Auto Zone.Bottom LineLocking lug nuts can be effective–as long as they are properly secured. Locked lug nuts require keys, which can add extra wheel protection.
How many lug nuts?
A lug nut is also called a wheel nut, and is used to hold the wheel securely onto the vehicle. Depending on the type of vehicle you have, you may have four, five, or six lug nuts.
What is shank style lug nut?
McGard shank lug nuts are machined from through-hardened, restricted-chemistry steel made exclusively for McGard for maximum strength and security. Then your locks get a triple layer of nickel topped by a single layer of micro-porous chrome plating for a gleaming rust-resistant finish.