How do I get into iBall router settings?

Once the setup is done, go to one of the web browsers like chrome, internet explorer, Firefox etc. Type in “192.168. 1.1” on the URL bar and hit enter. The username and password is “admin”.

How can I increase my iBall Baton 150m WiFi range?

I-Ball N 300 Wireless Router Repeater Mode Login

1. Now open the Web browser and type the http://192.168.1.1 and press the enter button.
2. User password “admin” to login IBall baton wifi router.
3. Enable WDS – check box to enable it.
4. I-Ball Repeater WiFi Password Settings.
5. 2: Press the Save button.

How can I reset my iBall Baton modem?

Reset IBall Baton IB-WRX150NE router to factory defaults Turn on router. Press Factory Reset button and hold for at least 15 seconds. Device restarts automatically. Default settings have been restored.

How do I setup my wifi router?

Router setup steps

1. Step 1: Decide where to place the router.
2. Step 2: Connect to the Internet.
3. Step 3: Configure the wireless router gateway.
4. Step 4: Connect gateway to router.
5. Step 5: Use app or web dashboard.
6. Step 6: Create a username and password.
7. Step 7: Update the router’s firmware.
8. Step 8: Create a Wi-Fi password.

Is WDS same as repeater?

WDS may also be considered a repeater mode because it appears to bridge and accept wireless clients at the same time (unlike traditional bridging). However, with the repeater method, throughput is halved for all clients connected wirelessly.

How can I secure my iBall Baton wireless router?

To secure your iBall router, change the default login password which is usually cited as admin. You can do so by going under Maintenance tab and clicking on Administration. Here, put a strong password for your iBall router and click on save.

What is WISP mode?

WISP or WISP Client is a mode when a Wireless port of your Wi-Fi router acts as a WAN port. If in the classical connection scheme, the router connects to the provider using a wired connection (Ethernet or fiber), then using the WISP technology, the router connects using its wireless module.

How do I limit the number of users on a WiFi Iball router?

On the left side, click on WiFi then click on Options. Scroll down and look for WiFiOptions. Select the number of wireless clients in the Max WiFi dropdown list and click on Submit. Note: To adjust the number of wireless clients that can connect per network, just click on the left and right arrows.

What is the 192.168 0.1 router IP address?

0.1 Router IP Address. The IP address 192.168. 0.1 is one of 17.9 million private addresses, and it’s used as the default router IP address for certain routers, including some models from Cisco, D-Link, LevelOne, Linksys, and many others.

How to set up WiFi connection with iBall Baton 150m Wireless N?

These are a few steps to Set Up WiFi Connection with iBall Baton 150M Extreme Wireless N Router on MTNL Dsl Modem Turn off your DSL modem. Remove components from the box which includes the router, power adapter and the Ethernet cable. Connect the power adapter to the router. Remove the Ethernet cable connecting the DSL modem to the PC.

Where do I Find my PPPoE on my iBall Baton router?

Go to “Quick configuration” on the left side of the screen. Click next, then click wireless client router and hit next. Select PPPoE and hit next. Username would be landline phone number and password is the C.A.No. (customer account number) which can be found on your phone bill.

How to open modem’s home page configuration page?

2. Opening modem or router configuration page Now, open any browser of your PC/Laptop and type the IP address of your modem/router on its address bar and press enter. You will be asked to enter username and password of your modem. You will find this on the manual provided along with modem.

What are the basic settings for a wireless modem?

Select a wireless menu option to view step-by-step instructions. Basic Settings : Enable/disable the wireless radio, change the network name (SSID), view the current security type, key/passphrase, and WPS PIN for the modem