How do I program my Radio Shack 4 in one remote?

the remote control’s entire library.

1. Manually turn on the device you want to. set up.
2. Press the corresponding device key ( TV. , VCR.
3. Hold down. P. until the red light blinks twice, then press.
4. Aim the remote control at the device you. want to operate.
5. Repeatedly press. POWER. then the device.
6. When the device turns off, press.

How do I reprogram my remote to my TV?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do you program a One For All universal remote?

How to Program your One For All® remote

1. PRESS the button for the device you want to program,(TV,VCR,CABLE,etc.), then RELEASE.
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. ENTER the 3 digit code for your brand.
4. You should receive 2 quick flashes after entering your code.

How do I program a Radio Shack?

Press the “Program” button, then “Limit.” “LO” will appear on the screen. Enter the low frequency where you want to begin searching. Press the “WX/E” button and “HI” will appear on the screen. Enter the highest frequency you want to search to and press “WX/E” again.

How do you program a RadioShack 3 in 1 Remote?

1. Turn on the device you wish to operate with your RadioShack 3-in-one remote control.
2. Hold the “Setup” button until the indicator light illuminates.
3. Press the “Channel Up” button repeatedly if you are programming the remote control to work with a television or cable box.

What do you do when your remote won’t change channels?

Remote control won’t change TV channels

1. Make sure there are no obstacles between the remote and your TV.
2. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel.
3. Make sure the batteries are installed correctly.
4. Try fresh batteries.

How to program a Radio Shack universal remote?

How to Program Radio Shack Universal Remote With Code Search 1 First of all “Turn The Device On” 2 Now press and hold the “Setup” button 3 Enter the “9-9-1” (three digit) code 4 Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

What are the features of the Radio Shack learning light up remote?

ˆ Features Your Radio Shack 5-In-One Learning Light-Up Remote allows you to control your TV, VCR, cable/SAT/DSS converter, DVD player, and an auxiliary device with one easy-to-use remote control. Its features include: Learning — stores and recalls additional remote control functions Sleep Timer —…

Where do I find the code for my RadioShack TV?

Find the codes for your device within the included “ Code List ”. for instance, if your device may be a TV and therefore the brand is RadioShack, from the Code List, select the RadioShack TV codes: 006, 010, 011, 013, etc. If your device’s brand isn’t listed, attend Auto Code Search find the code automatically.

How does a 5 in one remote work?

ˆ Operation Note: The command keys on the 5-In-One Remote work the same as the keys on your original remote controls. USING THE LIGHT Your remote has a backlight so you can see the keys in the dark. To turn on the light, press of the remote.