Does ModelSim work on Linux?

The ModelSim*-Intel® FPGA edition software is a version of the ModelSim* software targeted for Intel® FPGAs devices….

How do I run a ModelSim file?

1. In order to run your simulation, you need to create a project. Click File -> New -> Project.
2. Click on Add Existing File as shown in the picture to the right.
3. To start your simulation, click on Simulate in the Menu Bar, then click Start Simulation.
4. Here is your waveform window.

How run Quartus Linux?

Installation Steps for Quartus and ModelSim

1. Untar the Quartus tarball.
2. Open up a terminal and change to that directory.
3. Open up the setup.sh file in an editor.
4. Change the fist line from #!/bin/env bash to #!/usr/bin/env bash.
5. Run the file as ./setup.sh and follow the installation GUI.

How do I run QuestaSim on Linux?

If you have not already done so, perform Setting Up a QuestaSim Project with Command-Line Commands….To run a macro script:

1. From the Mentor Graphics® QuestaSim main window, chose Execute Macro.
2. In the Execute Do File dialog box, locate your QuestaSim macro file (. do).
3. Click Open.

Is ModelSim student edition free?

Modelsim is one of the best multi-language HDL simulator developed by Mentor Graphics. There are two opportunities to get a legal free Modelsim license: If you are a student, you can get a free student edition at Mentor website link. From Altera website, downloading Quartus II web edition.

Is Quartus prime free?

The Intel® Quartus® Prime Lite Edition software provides an ideal entry point to high-volume device families and is available as a free download with no license file required.

Do File commands ModelSim?

DO files are an automation tool in ModelSim. This tool allows ModelSim to automatically assign values to inputs in a simulation, run or restart the simulation, or even automatically verify circuits. In essence, DO files contain a list of commands that are run in the ModelSim command prompt.

Do File in QuestaSim?

do extension (that is, < file name >. do)….To perform a functional simulation with the QuestaSim software with command-line commands

1. From the Mentor Graphics® QuestaSim main window, chose Execute Macro.
2. In the Execute Do File dialog box, locate your QuestaSim macro file (. do).
3. Click Open.

How do I run in QuestaSim?

Place all the commands displayed in the QuestaSim main window into a text file and name the file with a ….To run a macro script:

1. From the Mentor Graphics® QuestaSim main window, chose Execute Macro.
2. In the Execute Do File dialog box, locate your QuestaSim macro file (. do).
3. Click Open.

Do file commands ModelSim?

DO files are essentially a very basic scripting language for ModelSim. In essence, DO files contain a list of commands that are run in the ModelSim command prompt. In previous labs, you may have used some of these commands to force inputs to a particular value or run the simulation.

How to get ModelSim to work on Linux?

a) Open Quartus and go to Tools>Options>EDA Tool Options, and make sure the path for ModelSim-Altera is set to / /modelsim_ase/bin b) Go to Assignments>Settings>EDA Tool Settings and make sure the Simulation Tool Name is set to ModelSim-Altera. 2) Navigate to the Quartus installation directory in terminal.

How to run ModelSim with VSim command in terminal?

No command ‘vsim’ found, did you mean: You can go to the bin directory of the Modelsim installation and do ‘./vsim’ . If that works add the bin path to your ~/.bashrc

How to install 32 bit libraries on ModelSim?

As ModelSim seems to be 32 bits, you may need to install 386-32 bit libraries using: xxxxxxxxxx 4 1 sudodpkg –add-architecturei386 2 sudoapt-get update 3 sudoapt-get install libc6:i386 libncurses5:i386 libstdc++6:i386 4 sudoapt-get install lib32z1 lib32ncurses5 lib32bz2-1.0 Main problem

How to install ModelSim on intelfpga 16.1?

./ModelSimSetup-13.1.0.162.run install Modelsim Again, you may need to replace ModelSimSetup-16.1.0.196.runwith your file name. Once the program is installed, in order to execute it, you just need to move to you installation directory, and find the binfolder. In my case it was ~/intelFPGA/16.1/modelsim_ase/bin.