How much horsepower does a 273 V8 have?
How much horsepower does a 273 V8 have?
273 V8
| 1967 specifications | 273 V8 | 273 V8 |
|---|---|---|
| Manual transmissions | 3 or 4 speeds | 4 speeds |
| Gross horsepower | 180 @ 4,200 | 235 @ 5,200 |
| Torque | 260 @ 1,600 | 260 @ 4,000 |
| Compression Ratio :1 | 8.8 | 10.5 |
How much does a Mopar 273 weigh?
| Engine | Weight |
|---|---|
| Mopar 273-318-340 “LA” V8 | 525 |
| Mopar 360 “LA” | 550 |
| Mopar 350-361-383-400 “B” V8 | 620 |
| Mopar 413-426W-440 “RB” V8 | 670 |
How much HP does a stock 360 have?
After-market support for the 360 is great, and with the right parts, it can easily make 450 horsepower and still have great street manners. If you need more inches, it’s easy to drop in a stroker crank and get 406 cubic inches.
How much HP does a 318 V8 have?
The 318 four-barrel, used on police pursuit and other cars, produed 165 hp and 240 lb-ft of torque.
What is the smallest Dodge V8 engine?
In 1953, Dodge unveiled its own V8, the Red Ram, and it was the smallest of the three Hemi V8s at introduction with just 241 cubic inches.
Is a 273 a good engine?
The Mopar 273 was Chrysler’s first LA small block V8. It was introduced in 1964 with a 2-barrel carburetor and made 180 HP. In 1965, a high performance version called the Commando was introduced. In spite of the small size, the Mopar 273 is a good engine.
How heavy is a 5.9 Magnum?
Registered. I was reading about this recently at the Cummins web site and they said a 5.9 liter Cummins diesel weighs 970 lb, whereas the magnum 360 V-8 weighs 540 lbs.
How reliable is a Dodge 318?
The Good And The BadIn terms of durability, the Mopar 318 is robust. The bottom end of most 318 engines used a cast-iron crankshaft, and though these are not as desirable as a forged crank, the cast-iron piece has proven to be very reliable.
Is a Dodge 360 a good motor?
The Dodge 360 is a good motor, not a ton of power but reliable, its everything else you need to be worried about.
How can I make my Dodge 360 more powerful?
The power output of the 360 Magnum engine can be increased with performance aftermarket modifications.
- Install a performance aftermarket cold-air intake system.
- Upgrade to performance aftermarket headers.
- Install a performance aftermarket exhaust system.
Are 318 and 360 blocks the same?
Nope, not the same. Bore size 318 is 3.91. Bore size 360 is 4.00. Crank is different as well.
How much horsepower does a Mopar 273 Commando have?
The 273 Commando had a hotter cam, 4 barrel carb, and made 235 HP. In 1966, a limited edition racing version of the 273 called the Super Commando was offered. The Super Commando was equipped with steel tube headers, a 700 cfm Holley 4-barrel carburetor, a high lift mechanical camshaft, and made 275 HP.
When did the Dodge 273 V8 come out?
The Dodge – Plymouth 273 V8 was the first engine in Chrysler’s LA series that began in 1964. The LA Series included such popular engines such as the 318, 360 and even the V-10 8.0 liter motor that is used in the Dodge Viper. The 273 was produced through 1969 and was used in such models as the Valiant, Dart and Plymouth Barracuda.
What kind of engine does a Plymouth 273 have?
The 273 was limited to the A and B bodies, with the 318 engine in the C Body, which was new to Plymouth at the time. Later came the 340 and then the 360, both with wedge chambers.
What was the horsepower of a 1966 Dodge 273?
In 1966 Chrysler released a limited edition of the 273 that had a 700 cfm carburetor as well as a higher life camshaft. These added features pushed the 273 V8 from 235 horsepower up to 275 horses.