What is a Hansen fitting?
What is a Hansen fitting?
The Hansen Han-Tool is a simple effective tool used to determine which Easy Fit Poly or Compression fitting will fit your pipe. The Hansen Han-Tool takes the guess work out of it and tells you exactly which size and type fitting to choose.
What is a Hansen coupling?
Hansen Couplings was developed and manufactured by Hansen Manufacturing Company, founded in 1915 by Fred Hansen. Hansen Two-Way Shut-Off Couplings seal both ends of line when coupling is disconnected. Spring actuated valves in both socket and plug provide immediate seal against escape of gas or liquid.
What size threads are air fittings?
Thread sizes are typically 1/8″, 1/4″, 3/8″, 1/2″ or 3/4″ pipe thread. A fitting that has female pipe threads (FPT) can only mate to something with male pipe threads (MPT) that are of the same pipe thread size. Nominal – the inner diameter size that the compressed air passes through.
How do I know what size air fit I have?
To find the correct fitting size, measure the outer diameter of the threads.
- For a male thread, measure the outer diameter (OD) of the thread.
- For a female thread, measure the top diameter of the opening (OD).
Where are Parker fittings made?
Ohio
Housed in our Ohio-based custom manufacturing facility, TFD can manufacture that unique part, or non-standard jump size fitting that no one has, in a variety of materials such as steel, stainless steel, brass and aluminum.
Should you use Teflon tape on air fittings?
The tape can also be used for air lines (compressor air hoses, air tools) to prevent leaks. If your compressor hisses at connections, use this so it will not keep turning on and off to pump up to pressure.
How do I know what size my air conditioner filter is?
Follow these 3 easy steps to measure your HVAC filter size:
- Step 1 – Measuring Length and Width (L x W).
- Step 2 – Measure the thickness (Depth) of your filter from front to back.
- Step 3 – Put Your measurements together (L x W x D).
- It’s as simple as that!
Do you need pipe inserts for push fit?
Pipe inserts are required on push fit and compression fittings when using plastic pipe. The inserts vary in size from one manufacturer to another ,so you should use the inserts relative to the pipe brand.
What kind of couplings are Hansen St series?
Hansen ST couplings are specifically designed as straight-through couplings without self-sealing valves. Availability in brass and stainless steel allows a wide variety of fluids to be handled without corrosion. A technical brochure and Safety Information Notice on this range of couplings is available in the downloads (tab) section shown above.
What kind of pipe fittings does Hansen make?
After the success of the Hansen Polyethylene Pipe Fittings, Hansen Products decided to design and manufacture a range of True Fit Threaded Pipe Fittings as there was a high demand for non-metallic threaded fittings.
Who is the founder of the Hansen company?
Hansen Manufacturing Company, now a division of Eaton, was founded in 1915 by Fred Hansen. For over a hundred years, Hansen has been a leading manufacturer of quick connect/disconnect couplings. Today, Hansen Couplings are considered industry standard for quick connect/disconnect couplings.
Who is the inventor of the Hansen disconnect coupling?
Quick Connect/Disconnect Couplers. Hansen Manufacturing Company, now a division of Eaton, was founded in 1915 by Fred Hansen. For over a hundred years, Hansen has been a leading manufacturer of quick connect/disconnect couplings. Today, Hansen Couplings are considered industry standard for quick connect/disconnect couplings.