What has a 4×114 3 bolt pattern?

3 – 4X4. 50 is a bolt pattern mainly used on smaller vehicles like honda accord, honda prelude, kia optima and kia spectra.

What PCD 114?

It means it has four holes and the distance between one bolt hole and the one opposite to it is 100 mm. 5×114 is slightly different. It simple means the circumference on which all 5 holes are drilled, it has a diameter of 114 mm. Same way 6 bolt wheel PCD is measured.

Is 114.3 the same as 4.5 bolt pattern?

yes they are the same bolt pattern.

What cars have 4×108 studs?

Bolt pattern 4×108 What cars have a 4×108 bolt pattern?

• Alfa Romeo (4) GT (1963-1977) Giulia (1962-1978) Montreal (1970-1977) Spider (1966-1993)
• Audi (7)
• Citroën (34)
• DS (8)
• Dongfeng (8)
• Ford (35)
• Jinbei (1)
• Lifan (2)

What cars have 5×114 3 studs?

The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.

What cars use a 4 114.3 bolt pattern?

What PCD means in Tire?

Pitch Circle Diameter
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes.

How do I check my PCD?

The easiest way to calculate the PCD is as follows:

1. Identify the size of the rim or tyre size.
2. Measure the distance ‘S’ between two adjacent studs from the centre of each hole.
3. Using the relevant diagram depending on the number of studs you have you should be able to identify the correct PCD.

Is 4 on 4 the same as 4X100?

GEMmechanic;21930: Other than stud thread sizes, the rear brake assemblies of all four stud GEMs are the same all the way back. All of these are 4X100.

Is 4X4 5 the same as 4×108?

Registered. Yes 4X108 and 4X4. 25 are the same.