How wide is a 1957 Chevy rear end?
How wide is a 1957 Chevy rear end?
60 inches
Products specifications
| Vehicle Fitment | 55-57 Chevy Tri-5 (120, 210, Bel Air and Delray ) Call for Station Wagons, Nomad and Sedan Delivery |
|---|---|
| Brake Space | 2.5 inches (axle standoff) |
| Width | 60 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
How wide is a Corvette rear end?
Which brings up the width issue. An 84 to 89 C4 rear axle is 62.5 inches from tire-mount surface to tire-mount surface. The 90 to 96 axles are -inch wider. Many fat-fender and shoebox cars can easily accommodate this girth with no resizing of the framerails or the rearend itself.
What rear end is in a C4 Corvette?
–1984-96 Automatic transmission Corvettes have Dana 36 rear ends. Factory G.M.
How wide is a stock 55 Chevy rear end?
Products specifications
| Vehicle Fitment | 55-57 Chevy Tri-5 (150, 210, Bel Air and Delray ) Call for Station Wagons, Nomad and Sedan Delivery |
|---|---|
| Brake Space | 2.5 inches (axle standoff) |
| Width | 60 inches (between wheel mounting surfaces) |
| Fluid Capacity | 3 quarts of 85w-140, non-synthetic (API GL-6 rated only) |
How wide is a Chevy S10 rear end?
S10 2WD’s have a drum to drum mounting width of 54.5″ which is perfect for a T-Bucket with larger back wheels. The Blazer and 4WD models have about 4.5-5″ more overall width and works well for 26 and newer fender-less roadsters, and 23 style T’s with narrower rear wheels.
What is a Dana 36?
The Dana 36 ICA Corvette IRS axle is found only in 1984 through 1997 Chevrolet Corvettes that came equipped with automatic transmissions. They feature a 7-3/4″ ring gear, 27 spline axle shafts, and some models came with a unique crossmember style housing.
How wide is a C3 Corvette rear end?
| Chevrolet Corvette (C3) | |
|---|---|
| Length | 182.1 in (4,625 mm) (MY1968) 185.3 in (4,707 mm) (MY1982) |
| Width | 69.2 in (1,758 mm) (MY1968) 69.0 in (1,753 mm) (MY1982) |
| Height | 47.8 in (1,214 mm) (MY1968) 48.0 in (1,219 mm) (MY1982) |
| Curb weight | 3,520 lb (1,597 kg) |
How wide is a G body rear end?
Products specifications
| Vehicle Fitment | 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons) |
|---|---|
| Brake Space | 2.5 inch axle standoff |
| Width | 58 inches (between wheel mounting surfaces) |
How do I know the width of my axle?
You would simply add the width of one tire (assuming your wheels have a zero offset) to the 89 inch hub face dimension of this axle to find the total width. For example, if you have 6 inch wide tires, then you would add 6 inches to 89 which gives you a total width of 95 inches.
Are Corvettes rear engine?
The Corvette’s traditional front-engine, rear-wheel-drive layout endured for seven decades, making it one of the world’s longest-running, continuously produced passenger cars with sales surpassing 1.7 million units.
How wide is a 56 Chevy rear end?
What was the length of a 1957 Corvette?
This unique model was the product of creative engineering research and served as the forerunner of numerous Corvette sports/ racing models. It incorporated many advanced features that helped shape future automotive design in America’s sports car. General Data- Wheelbase, 102 inches, Overall length 168 inches.
Can a 59-64 axle be installed in a 57-62 corvette?
If a 59-64 pass car axle were to be installed in a 57-62 Corvette axle housing, the overall tread width would become 1” wider. This was once a method of increasing rear tread width on early Corvette race cars.
What kind of suspension does a 1953 Corvette have?
1953-62 Corvette frame, with Channel X-member, Chevy performance motor mounts, Automatic Transmission mount, Tubular coil spring IFS with front sway bar, new manual rack & pinion (power rack upgrade available) and one of the following rear suspension:
What is the rear axle and rear end ratio of a corvette?
Rear Axle/Rear End Ratio Information. All Corvettes built before 1981 had 1-1 transmission final drive gear ratios. This is the prime example of how an overdrive transmission change would benefit: 1969 Corvette with an original Muncie M20 that has a 2.52 first gear ratio with a 3.36 rear axle gear ratio.