Where should you anchor the fall arrest system to?

Select an anchor point that is as close as possible to being perpendicular to the unprotected edge, and at the centre of the work area. Have a competent person inspect the travel restraint system thoroughly before (and after) use.

How far can employee fall to a safety net?

Nets shall extend 8 feet beyond the edge of the work surface where employees are exposed and shall be installed as close under the work surface as practical but in no case more than 25 feet below such work surface.

Is a safety net fall protection?

Safety nets are a passive type of fall protection designed to catch a worker after they have fallen to help prevent contact with the surface below and to prevent injury. Safety nets are erected around an elevated work area in such a way that if a worker falls from that work area, they will be caught in the net.

What is a safety net in construction?

A safety net is a net to protect people from injury after falling from heights by limiting the distance they fall, and deflecting to dissipate the impact energy. Safety nets are used in construction, building maintenance, entertainment, or other industries.

What is the 6 foot rule in construction?

The 6-foot rule. Subpart M requires the use of fall protection when construction workers are working at heights of 6 feet or greater above a lower level.

What height is a safety net required?

Safety nets can be used with a maximum falling height up to 6 m (3 m within 2 m of the edge). Install the Safety net as close as possible to the working level, preferably within 2 m. are present to develop solutions according to an established structure – an Edge Protection Analysis.

When should a safety net be installed?

Safety nets must be installed as close as practicable under the surface on which employees are working, but in no case more than 30 feet below. When nets are used on bridges, the potential fall area must be unobstructed.

Why do you need a safety net?

The Social Safety Net of the United States is made up of various Welfare Programs to protect low-income Americans from poverty and hardship. The programs are meant to be a safety net to catch Americans if they fall on hard times. The goal is to get Americans of sound body and mind back on their feet.

What is the maximum height to work off a ladder?

What is the maximum height a ladder can be used? There is no maximum height for using a ladder. However, where a ladder rises 9 metres or more above its base, landing areas or rest platforms should be provided at suitable intervals.

What are the 2 types of fall protection?

There are two major types of fall arrest: general (nets) and personal (lifelines).

What does anchor mean in fall protection system?

The anchor is usually a device that has been purposefully manufactured and installed, and is used to connect to and fully support a fall protection system. When a worker is using a fall protection system, they will connect their lanyard or lifeline to an anchor. Anchorage means a secure connection point for a fall protection system.

How does a personal fall arrest system work?

Personal fall arrest systems arrest a fall through the use of Height Safety PPE equipment. This can include: self-retracting lifelines. These systems utilise Roof anchor point systems , lanyards, rope lines and pole straps in the personal fall arrest setup, however the harness in particular is of critical importance.

How tall do you have to be to use a fall arrest system?

Personal fall arrest systems require specific Height safety PPE and attachment systems. Each system should be used alongside scaffolding, and should prevent workers from falling greater than 1 metre, or a maximum of 2 metres with a safety net. What are personal fall arrest systems?

Where is the fall arrest line on a harness?

A full body harness has the power to stop even the most dangerous falls. The fall arrest line is attached to the point on the harness that will provide the most appropriate protection for the situation.