How much HP does a Stage 2 WRX have?

The Stage 2+BigSF Power Package includes an Accessport V3, 3″ Stainless Steel Turboback Exhaust (Resonated), Subaru Big SF Intake System, and COBB Vehicle Badge!

What is needed for Cobb Stage 2?

Stage 2

1. Intake Requirements: COBB SF Intake – Required.
2. Turbo Inlet. COBB Turbo Inlet Hose – Required.
3. Intercooler. Stock intercooler- Required.
4. Cam-Driven Fuel Pump: Autotech High Volume Fuel Pump (CDFP)- Required.
5. Exhaust Requirements:
6. Downpipe.
7. Boost Targets.
8. All other intake, exhaust, and engine components must be stock.

Is Cobb Stage 2 tune safe?

Registered. Flycaster said: Target boost for the Cobb Stage 2 maps is 17.5 psi, + 0.5 psi. The Cobb maps are considered “safe” by just about everyone other than SOA, especially if you run their 91 oct map.

Will a Stage 2 WRX pass emissions?

For all who were wondering if the Cobb stage II will pass inspection through the OBDII test, it will. Yep.

What does Stage 2 WRX mean?

The GrimmSpeed Stage 2 Power Package is a well-rounded kit, offering increased power and torque output thanks to reduced restriction before and after the turbo, as well as a more aggressive street presence thanks to the intake and exhaust tones.

How much HP can you get out of a WRX?

If you’re searching for an exhilarating ride, hit the Minneapolis streets in the 2019 Subaru WRX. When you get behind the wheel of the WRX STI and WRX STI Limited models equipped with the standard 2.5-liter DOHC turbocharged engine, you’ll receive a whopping 310 horsepower.

What Is a Stage 2 tune?

A stage 2 tune involves fitting a turbo-back exhaust on turbocharged vehicles or a cat-back exhaust system on non-turbocharged vehicles. In either case, these systems are designed to improve airflow from the engine. They are also well-known for improving the sound of a car.

How safe is a Cobb tune?

Personal experience are the cobb tunes are super conservative. If your engine blows apart and sends rods through the concrete or hood your engine had issues. I’ve logged so much and barely have even seen any counts of knock. Pretty much no corrections or anything on stage 3 with other matching mods.

What does a Cobb Stage 1 do?

The COBB Stage 1+Big SF Power Package is a simple bolt-on and tuning solution that will allow you to easily improve the power output of your 2015+ WRX! The heart of this package is the Accessport V3. It also provides increased airflow from the Big SF Intake & Airbox combo.

Will I pass emissions with tune?

Here’s a good reminder to anyone running a tuned car out in California: As of today, July 19, the state’s notoriously strict smog testing will automatically fail any car when it detects modified software onboard, aka, a tuned ECU. Drivers can’t register a car in the state unless it’s passed a smog check.

Can you pass smog with a tune?

A tune that turns off any of the monitors that need to be run and passed for the smog test will make it fail. Unless the pulley swap is pretty stealth looking, it “should” fail the visual for that alone.

How much horsepower does a Stage 2 tune add?

The APR Stage 2 ECU Upgrade is the first step towards making more power! This simple upgrade requires an upgraded exhaust system and intake system and no other engine hardware modifications and produces 270-283 HP with 319-350 FT-LBS of torque.

What’s the power of Stage 2 on a WRX?

You can simply flash these tunes with your AccessPort, without having a custom tune made for your car. Stage 2 takes things a step further in terms of power added, with some WRX owners gaining 70 whp or more from the stock car’s power.

Is there a stage 3 kit for Subaru WRX?

At least one company, GrimSpeed, is selling a Stage 3 kit for the 2015+ Subaru WRX. GrimSpeed’s Stage 3 kit includes an intake and j-pipe, which alone would either be Stage 2 or 2+ depending on who you ask, as well as an intercooler, charge pipe, and EBCS.

Is there a stage 2 STI WHP for Cobb?

BUT thats just cobb’s exhaust and there are many mix and matches, as well as tuning which is a whole other thing in itself, as well as wrxtreme06 said, a ton of other variables such as dyno performance. As for your WRX question I’d say the answer is: ALOT.

Where do I plug in Stage 1 on my WRX?

The AccessPort comes preloaded with tunes for the various stages. It simply plugs into the OBD-II port under your dash, and with the press of a few buttons, your car will be Stage 1 in a few minutes.