How long is a Stanley Number 2 plane?

The long 2 actually measures 7 inches long on the side profile and 8 inches long overall. Finally, a measurement that matches the label on the box. There is another thing to note.

What do the numbers mean on Stanley planes?

The numbering system was devised about one hundred years ago at the Stanley Rule and Level Company to differentiate the size and types of planes they made. The numbers 1 to 8 simply refer to different lengths of plane with #1 being (very) short and #8 being pretty long.

What is a No 2 plane for?

2 is a good smoothing plane for children. It’s usually big enough for their hands, and it isn’t terribly heavy. The vintage ones were 2-1/4 lbs. And I’ve heard from maybe one woodworker in all my years that they had abnormally small hands that were suited for a No.

What is the most valuable Stanley plane?

Stanley No. 1 Bench Plane This slightly rusted No. 1 and original box sold on 4 May 2009 for $2,918. It was the most expensive Stanley Plane sold on eBay in 2009.

How long is a Stanley #5 plane?

Enhance your purchase

How long is a Stanley No 7 plane?

This ‘Stanley Bailey’ No 7 is a 22“ long sole plane primarily used for the truing of longboards prior to joining. This plane is also known as a jointer.

Are the new Stanley hand planes any good?

I then bought a new Stanley block plane and had the same experience. Don’t get me wrong, the Nielsen planes are great, well built planes, but for everyday block plane use, the Stanley is the one I reach for most of the time. It just feels great in my hand and consistently does a great job.

How big is a number 4 plane?

The #4 plane, which is 9 inches (230 mm) in length, is the most common smoothing plane in use. Historically wooden smoothing planes in the United States have typically been 7 to 9 inches (180 to 230 mm) long with irons 11⁄2 to 21⁄2 inches (38 to 64 mm) wide.

How long is a smooth plane?

The smoothing plane is the shortest of the bench planes. Under the Stanley Bailey numbering system for metal-bodied planes #1 to #4 are smoothing planes, with lengths ranging from 51⁄2 inches (140 mm) to 10 inches (250 mm).

Are old Stanley planes worth anything?

Stanley Bedrock Planes These all metal-planes were produced between 1898 and 1940. They are often worth twice what a standard Stanley plane would cost from the same era, if all other factors such as condition are equal.

What kind of plane is a Stanley No.4?

STANLEY NO. 4 1/2C SMOOTH PLANE, A wide heavy plane used for major smoothing. Corrugated bottom. Sweetheart logo on the cutter with 1 1/2-inches of meat left. Rosewood handle and tall knob are very crisp. 94% japanning. Good throat.Some minor roughness on the sole.

How to identify Stanley hand planes age and type?

Here is a list of the types and dates of the Stanley planes: Stanley Type 1 Handplanes: 1867-1869. Stanley Type 2 Handplanes: 1869-1872. Stanley Type 3 Handplanes: 1872-1873. Stanley Type 4 Handplanes: 1874-1884. Stanley Type 5 Handplanes: 1885-1888. Stanley Type 6 Handplanes: 1888-1892.

What was the date of the Stanley plane?

STANLEY BEDROCK NO. 603C, SMOOTH PLANE, An early one with the 1895 patent date cast in the bed. (18)92 patent date on the cutter with about 1 -inch of life left. STANLEY R. & L. Co. BEDROCK on the cap.

What kind of tool is a Stanley plane?

Everything you wanted to know about Stanley planes made by the Stanley Rule & Level Company Stanley woodworking planes are some of the most recognizable and collectible antique woodworking tools available.