How do you unlock a ladder hinge?

To Unlock Hinge Compress palm buttons inward to “self lock”. Position ladder in the correct “use” position and the hinge lock will engage auto- matically. It may be difficult to unlock hinges if there is pressure. To relieve pressure, jiggle half the ladder back and forth until hinge can be easily engaged.

Are multi position ladders safe?

Are multi-position ladders safe? Yes, multi-position ladders are safe to use. They feature locks to ensure safety, slip-resistant steps, and rungs to protect against any accidents. They’re also made of superior strength materials to ensure large weight capacities.

What is a scaffolding ladder?

A ladder jack scaffold is a system designed to perform activities, such as: installing building exteriors, trim, and finishes. Triangle-shaped brackets called “ladder jacks” are attached to portable ladders, which are used on each side of a ladder jack scaffold to form a means of support for a platform.

Can I put a ladder on a scaffold?

Scaffolding Safety Don’ts This includes any building materials or tools that you may have been using on the scaffold while you were working. In most instances, scaffolds should be capable of supporting at least four times its maximum intended load. Don’t use boxes or ladders to increase your work height.

Can I put a ladder on top of a scaffold?

It’s not safe. One of the main points of using scaffolding is to reduce the risk from using ladders. Putting the ladder on top of the scaffold is an increased risk over placing it on the floor or ground as intended.

Where can I find literature for a Werner Ladder?

Now available in the “RESOURCES” section on the left side of a product’s page! Simply navigate to a specific product to access available sell sheets and other associated literature. Need help with choosing or installing an attic ladder?

What kind of telescoping ladder does Werner use?

The Werner MT Series Telescoping Multiladder is a professional grade, multi-purpose ladder that can be changed into different positions and working heights. The MT Series ladders consist of three sections and two different locking mechanisms. (See Positions 1–4) Use ladder only in positions as shown below.

What’s the best way to set up a ladder?

For safety, follow these set-up and use instructions: • Never place anything on or under ladder to gain height, or use unstable means to adjust for uneven surfaces. • Check that all four ladder ends are firmly supported to prevent excessive movements. • Use extreme caution when getting on or off ladder. • When possible, have someone hold ladder.

How do you unlock the hinges on a ladder?

Position ladder in the correct “use” position and the hinge lock will engage auto- matically. It may be difficult to unlock hinges if there is pressure. To relieve pressure, jiggle half the ladder back and forth until hinge can be easily engaged.