What is a go gauge and no go gauge?

A go/no-go gauge refers to an inspection tool used to check a workpiece against its allowed tolerances via a go/no-go test. Its name is derived from two tests: the check involves the workpiece having to pass one test (go) and fail the other (no-go).

Which type of plug gauge has go and no go sizes?

In a combination go/no-go plug gauge (also called a double-ended plug gauge), the gauge handle has a go plug gauge extending outwards from one side of the handle and a no-go plug gauge extending outwards from the opposite side.

What are go and no go gauges and how are they used?

Go – No Go gauges are manual mechanical measuring tools used in production lines to guarantee the machining has taken place and it has been performed correctly. They differ from each other based on the type of surface check being performed; for example geometry and/or dimension.

Who makes Go No Go gauges?

Manson Precision 9mm Go and No Go Headspace Gauges.

What is use of no go gauges?

Go/No go gauges are tools used to check the tolerances of a workpiece, for example, thread depth and major diameter of a screw. Go/no go gauges are utilized to ensure interchangeability of parts between processes. Go/no go gauges rate a component as either acceptable (within tolerance), or outside of tolerance.

Do I need both go and no go gauges?

Don’t do without the Go gauge as it is also possible to have too little headspace. The field guage is a quick check that there is not too much head space. If the bolt closes on a field gage the weapon is unsafe to fire. The gages you need are the go and no go gages.

What is Taylor’s principle of gauging?

It states that GO gauge should check all related dimensions. Simultaneously NOGO gauge should check only one dimension at a time. It states that GO gauge should check all related dimensions.

How many turns on a no go gauge is acceptable?

three
The use of NO GO gages and the limits of acceptance. 4.2. 1 NOT GO (HI) Thread Plug Gages – Purpose and Use “NOT GO (HI) functional diameter is acceptable when the NOT GO (HI) thread plug gage applied to the product internal thread does not enter more than three complete turns. The gage should not be forced”.

Do I need a field gauge?

A field gauge is the only gauge needed to check servicibility of an assembled rifle. If your rifle’s headspace is within tolerance, and you shoot only in-spec ammunition, it is doubtful that you will ever shoot enough ammunition to cause the headspace to go out of tolerance.

What is the 10 to 1 rule?

This standard stated that when parts were being measured that the accuracy tolerances of the measuring equipment should not exceed 10% of the tolerances of the parts being checked. This rule is often called the 10:1 rule or the Gagemaker’s Rule.

How many turns can a Nogo thread gauge go?

three complete turns
As Stated in ANSI/ASME B1. 2-1983, the “NoGo (Hi) functional diameter is acceptable when the NoGo (Hi) thread plug gage applied to the product internal thread does not pass over the thread more than three complete turns.” The gage should not be forced.

What’s the difference between a go and no go snap gauge?

Combined limit snap gauges – have the go and no-go dimensional gauges on the same side of the tool, with the go gauge on the outer edge and the no-go gauge interior relative to the go gauge.

How big is a go and NOGO gauge?

NOGO size = 12.450 mm and it is measuring criteria for a workpiece.

Which is greater the value of go or Nogo?

In snap gauge, the value of GO is always greater than NOGO. and it is measuring criteria for a workpiece. According to snap gauge, 25.55 mm size is acceptable for a workpiece. When we push snap gauge towards the workpiece the only area of GO cover i.e. workpiece is accurate.

What do you need to know about snap gauges?

Typical snap gauges consist of a metal frame most often in the shape of a C or a U. Within the jaws of the frame are a set of two anvils, typically one fixed and the second under spring tension. There is also a backstop on the inner portion of the frame that is used to locate the part.

https://www.youtube.com/watch?v=BY2fK-cLW-w