What does LP and EP mean?

Back in the 20th Century, the term EP stands for Extended Play Record. The difference between EP and LP is that an LP is ‘Long Playing’ and generally has more than 8 tracks. Whereas, as above an EP has 4-6 tracks.

How long does an LP record play?

LP record

How long should an EP be?

An EP is one to three songs, with one song at least 10 minutes long, and a total running time of 30 minutes or less. Or, four to six songs with a total duration of 30 minutes or less. Therefore, a release with one to three songs with none over 10 minutes is a single.

Which is longer EP or LP?

LP in music means Long Play and is a full length album. EP in music means Extended Play and is a half length album. EP is extended in the sense that it’s longer than a single.

Can 2 songs be an EP?

An EP is considered 1-3 songs with one song of at least 10 minutes in length and a total running time of 30 minutes or less. Or an EP is considered 4-6 songs with a total running time of 30 minutes or less.

What does LP stand for?

Long Play
LP stands for ‘Long Play. ‘ These are longer than EP’s, originally needing two vinyl per release until the 33 1/3rpm 12-inch record was released. LP’s can have 20+ songs on each release and the definitions can vary depending on who you ask.

What replaced the LP?

Chapter8
Chapter8 “This Will Replace the LP Record”

Is LP and vinyl the same?

LP means Long Play which refers to a full-length record. Vinyl is a word used now interchangeably with record or album. LP technically refers to the length of a record which can be between 10-12 songs. Vinyl refers to the actual object or medium used as a format of playing music similar to a record.

Is it better to release singles or EPs?

It’s very easy for single tracks for smaller artists to get lost and be missed too, while EPs tend to get better coverage. For example, if you check out the ‘New Releases’ section of Spotify, you’ll see that it tends to favor EPs and albums.

Can an EP be 10 minutes?

In order for a release to be considered an EP, it must meet one of the following two requirements: The release has a total of one to three (1-3) tracks, one or more of the tracks is/are 10 minutes or longer and entire release is less than 30 minutes.

Can an EP be 2 songs?

Why do artists release EPs?

What Is an EP Used For? Musicians release EPs for a variety of reasons, but they are most frequently used as promotional tools to grow a fan base. EPs often introduce new bands, keep interest in an artist alive between the release of full-length albums, or help promote a tour.

What was the playing time of an LP record?

At the time the LP was introduced, nearly all phonograph records for home use were made of an abrasive (and therefore noisy) shellac compound, employed a much larger groove, and played at approximately 78 revolutions per minute (rpm), limiting the playing time of a 12-inch diameter record to less than five minutes per side.

What kind of record is a long player?

“Long Player” redirects here. For the album by the Faces, see Long Player (album). The LP (from “long playing” or “long play”) is an analog sound storage medium, a phonograph record format characterized by a speed of ​ 33 1⁄3 rpm, a 12- or 10-inch (30- or 25-cm) diameter, and use of the “microgroove” groove specification.

How big is an LP record in rpm?

For the album by the Faces, see Long Player (album). The LP (from “long playing” or “long play”) is an analog sound storage medium, a phonograph record format characterized by a speed of ​ 33 1⁄3 rpm, a 12- or 10-inch (30- or 25-cm) diameter, and use of the “microgroove” groove specification.

How long does a 78 rpm record have to play?

For soundtrack purposes, the less than five minutes of playing time of each side of a conventional 12-inch 78 rpm disc was not acceptable. The sound had to play continuously for at least 11 minutes, long enough to accompany a full 1,000-foot (300 m) reel of 35 mm film projected at 24 frames per second.