How do I identify my GM transmission?
How do I identify my GM transmission?
The easiest method of GM automatic transmission identification is to examine the transmission pan. New transmission designs came with new, unique pan shapes, and the general shape of the pan often paints a fairly clear picture of which automatic transmission you are dealing with.
What cars have the 4T65E transmission?
4T65E-HD
- Oldsmobile 88 LSS L67.
- Pontiac Bonneville SSEi L67.
- Chevrolet Impala L67.
- Chevrolet Monte Carlo L67.
- Pontiac Grand Prix GTP/GXP.
- Buick Regal GS.
- Buick Riviera L67 (97-99)
- Buick Park Avenue Ultra.
What is the difference between 4t60e and 4T65E?
The 4t65e is inherently stronger than a 4t60e; but lack of auxiliary cooler, cheap seals without enough lip, poor PCS design/placement, and non-hardened parts where they are needed all contribute to early failures of these units. All of this is correctable with aftermarket parts (upgrades, shift kits, etc.)
How much power can a 4T65E transmission handle?
A stock tranny should hold about 300 WHP, as long as the shifts aren’t too harsh. Otherwise the IS will snap. As long as you keep the shifting reasonable and start raising the power gradually, IMO the chain will go first.
Where is the transmission number located?
The transmission number will be on the side of the transmission, or on the top of the transmission (manual and automatic respectively).
Is it cheaper to rebuild a transmission or replace it?
Generally, if a repair estimate costs more than a rebuild, then the rebuild is the service to go with. If the cost of a replacement transmission costs less than a repair or rebuild, then the replacement is the best alternative. Most importantly, you should only use the services of transmission professionals.
How heavy is a 4T65E?
Transmission General Specifications
| Name | Hydra-matic 4T65-E |
|---|---|
| Transaxle Weight Dry | 87.9 kg (194.2 lbs) |
| Transaxle Weight Wet | 97.0 kg (214.4 lbs) |
| Maximum Trailer Towing Capacity | 907 kg (2000 lbs) |
| Maximum Gross Vehicle Weight (GVW) | 2903 kg (6,400 lbs) |
What transmission do I have?
Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.
Which number in the VIN is the transmission?
The Vehicle identification number is a 17-digit number where each of them has a unique meaning that is associated with the vehicle. The transmission of the vehicle is usually in between the fourth and the ninth digits-you would get to know the type of transmission of the vehicle.
How do I find my transmission by VIN number?
How to Check the VIN for the Transmission Type
- Visit the CARFAX website to run a VIN search. Simply enter the VIN of the vehicle in question into the search box on the CARFAX homepage and run a search to obtain a detailed report on the vehicle in question.
- Visit the AutoCheck website.
When did General Motors make the 4T65E transmission?
The 4T65E was a transmission manufactured by General Motors from 1998-2011. It replaced the 4 T 60E starting in the mid to late nineties. It is designed for transverse mounted engines (front/all wheel drive).
Why does my 4T65E not move when I put it in gear?
If your 4T65E doesn’t move at all whenever you put it into gear, it’s a good idea to start with the transmission fluid . It could be out or extremely low. Get to know the signs of low transmission fluid so that it doesn’t happen again.
What does the t stand for in a 4T65E?
It is designed for transverse mounted engines (front/all wheel drive). That’s what the “T” in it’s name stands for, as opposed to the 4 L 65E, which is for longitudinal (rear wheel drive) vehicles. It was an incredibly versatile transmission and could have up to twelve different final drive ratios.
Is the 440 T4 Transmission compatible with the 4T60 transmission?
The 4T60-E ceased production after 1999 model year. As far as mounts are concerned, the same transmission mounts that will work with the 440-T4/4T60 transmissions should also work with the 4T60-E transmission. But the 4T60-E transmission is a little longer on the passenger’s side than the non-electronic 440-T4/4T60 transmission is.