Popular tips

How do I setup my ZTE ZXV10 W300 router?

by Rhyley Bryan

How do I setup my ZTE ZXV10 W300 router?

ZTE ZXV10 W300

  1. Log in to your router using the IP address in your browser http://192.168.1.1 and login with the admin username and password admin/admin (page 13)
  2. Click on Interface Setup tab and LAN sub-tab. (
  3. Locate the DNS section, change the DNS Relay to “Use User Discovered DNS Server Only”

How do I setup my ZTE wireless router?

The ZTE LTE device is an approved CAT6 device for MTN LTE SIM cards.

  1. Connect to your router directly via LAN cable or Wi-Fi.
  2. Open your internet browser.
  3. Navigate to the routers IP address.
  4. Enter 192.168.
  5. Log into the router.
  6. Click Login.
  7. In the router Home interface, under ‘2 My Router’, select “LTE /UMTS Settings”.

How do I configure WIFI settings on my router?

Download Now!

  1. Find your router configuration page. Access the router configuration page by typing the router’s IP address in to the address bar, and pressing enter.
  2. Log in with the username and password.
  3. Find the Wireless Settings page.
  4. Set the new channel, usually with a dropdown menu.
  5. Your router will now reboot.

How do I log into my ZTE f660?

Step 01: Open the web browser (Internet Explorer/Mozilla Firefox) Type in the address bar 192.168. 1.1. Then click ok to proceed. Step 02: Put the username as, User name: user Type the password as, Password: user Then click login to proceed.

How do I change the DNS on my ZTE router?

You begin on the Status page of the ZTE H220N router. To change the Domain Name System settings, click the link at the top of the page labeled Network. Then in the left sidebar, click LAN, and DHCP Server.

How do I reset my ZTE ZXV10 W300 router?

Reset ZTE ZXV10-W300 router to factory defaults

  1. Turn on router.
  2. Press Factory Reset button and hold for at least 15 seconds.
  3. Device restarts automatically.
  4. Default settings have been restored.

How do I access my ZTE router admin?

ZTE Router Login Open your web browser of choice and type IP address of your ZTE router in the address bar. You can find the ip address on the back of your router. Now enter the default username and password of your router by accessing the admin panel.

How do I connect my rain sim to my ZTE WIFI router?

D-link, Telkom or ZTE router – http://192.168.0.1….For an iOS mobile device:

  1. Go to settings, Mobile data, Mobile Data network.
  2. Under Mobile Data set the APN to “rain”
  3. Under LTE setup set the APN to “rain” (on the later versions of iOS)
  4. Leave the username and password empty.
  5. Go Back to Mobile Data.
  6. Select Mobile data options.

How do I get to my wifi settings?

Swipe down from the top of the screen. Touch and hold Wi-Fi . To move between listed networks, tap a network name. To change a network’s settings, tap the network.

How do I log into my ZTE modem?

Type http://setup.zte in the address bar, then press Enter on your keyboard. Type http://setup.zte in the address bar, then press Enter on your keyboard. Enter the password (default is admin), then click Login. Enter the password (default is admin), then click Login.