What is the difference between a 9 speed chain and a 10 speed chain?

The main difference between a 9 speed chain and a 10 speed chain is that the 10 speed chain is thinner in width, because of the 10 speed cassette, which in turn means the chain is lighter.

What is a good chain length?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

How to measure the size of Shimano cycling shoes?

Place a piece of A4-sized paper on the floor, adjacent to the wall. Place your foot on the paper and make sure that your heel is pushed back and touches the wall. Then proceed with drawing a line at the end of your big toe. Thus; measure the length from the heel to the toe.

Can You Wrong chain length on a Shimano 12?

DON’T DO THAT. It will definitely give you the incorrect chain length on the new Shimano 12 speed systems. In fact, if you’re having shifting problems on your new XTR M9100, XT M8100 or SLX M7100 drivetrain, incorrect chain length cold be the issue.

How can you tell the length of a chain on a bicycle?

If you don’t have an old chain to compare length with, you can use this method to determine the correct chain length for your bicycle. First, shift the front derailleur over the largest chainring and the rear derailleur to the smallest cog. Begin by wrapping the chain around the largest rear cog.

How do you check the length of a rivet chain?

Connecting rivet chains use a special rivet to connect the chain. Before removing the old chain, verify that it is the correct length. Shift the bike into the largest chainring and rear cog. The chain should be long enough to make this shift with two slight bends at each pulley of the rear derailleur.