How do I reset my imaging unit?

Reset Life Counter

1. With the power on, open the front door.
2. Press and hold the cancel button (X). After a few seconds, the printer will flash its indicator lights telling you it’s resetting the life counter.
3. Close the front door.
4. The printer should restart automatically.
5. Enjoy your new imaging unit!

How do I reset my Samsung CLX 3185 printer?

instructions to reset the machine to the factory defaults….

1. Connect the special network cable between the printer and the.
2. Open System Preferences and select Print & Fax settings.
3. Click Settings > Network Settings in the top menu bar.
4. Click Restore Default in the left side bar, and click the Clear button next.

How do I reset my Samsung laser printer?

How To Reset Factory Default Settings for Samsung Printers

1. You have to press the keys in quick succession MENU # 1 9 3 4. The display will show TECH.
2. Select the MENU key again followed by ENTER.
3. Press the < key two times.
4. Select ENTER.
5. Press ENTER again.
6. Exit from this mode by pressing MENU # 1 9 3 4 again.

How do I change the imaging unit on my Samsung printer?

Samsung Laser Printers – How to Replace the Imaging Unit

1. Open the front cover and remove the toner cartridge.
2. Pull the imaging unit straight out of the printer, along the printer groove.
3. Install the new imaging unit into the printer, aligning it along the printer groove.

How do I clean my Samsung imaging Unit?

Use a dry lint-free cloth to clean the machine. Turn the machine off and unplug the power cord….Cleaning the inside of the machine clears and reduces these problems.

1. To prevent damage to the imaging unit, do not expose it to light for more than a few minutes.
2. Do not touch the green area of the imaging unit.

What does replace imaging unit mean?

When a imaging unit has reached the end of life, the machine will stop printing. To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.

How do I reset my Samsung CLP 325w?

How to Reset the Samsung CLP-300 Printer

1. Push the power button to turn off the power to your Samsung CLP-300 printer.
2. Unplug the power cord from the wall outlet, then from the back of the printer.
3. Press and hold “Stop” until the printer starts printing a test page.

How do I reset my Samsung CLP 315?

Open a Web browser and enter the IP address after “http://.” For instance, “http://192.168.1.107.” Hit “Enter.” You will be taken to Samsung’s SyncThru Web Service. Note that since this is all happening locally, you do not actually need to be connected to the Internet for this to work. Click “Reset.” Click “Clear.”

Why is my Samsung printer not printing?

The machine may be configured incorrectly. Check the Printing Preferences to ensure that all of the print settings are correct. The printer driver may be incorrectly installed. Uninstall and reinstall the machine’s driver.

How do I reset my Samsung printer 2020?

Click a printer in the list, while holding down Option on the keyboard. (Alternatively, use the mouse right click function to select a printer in the listing.) When the popup message is displayed click Reset to confirm resetting the printing system.

Is imaging unit same as toner?

The toner cartridge contains several components including the color pigment used to create letters and images. The imaging drum is the unit that transfers the toner to paper by following the principles of electrophotography. Not all laser printer models require both toner cartridge and imaging drums.

How long should an imaging unit last?

Over time, the drum unit deteriorates and eventually needs to be replaced. Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.

How to avoid damage to a Samsung CLX-3185?

Do not use sharp objects such as a knife or scissors to open the imaging unit package. Do not touch the drum located in the imaging unit. Use the handle on the cartridge to avoid touching this area. Be careful not to scratch the surface of the imaging unit. To prevent damage, do not expose the imaging unit to light for more than a few minutes.

Why does my Samsung clx-3175 change imaging unit?

My Samsung CLX-3175 printer had a message “change imaging unit”. I ordered a new one and changed it with instructions. Still after changing there is same message “change imaging unit”. I have replaced the new unit several times and restarted printer. Nothing helps.

How to remove toner from Samsung CLX-3185 printer?

Cover it with a piece of paper to protect it if necessary. Holding the groove on the front of the imaging unit, push imaging unit in to the printer. Insert the waste toner container into position and then push it to make sure that it is firmly seated in place. Slide four toner cartridges back into the printer. Close the front door firmly.

When to replace the imaging unit in a Samsung Printer?

Samsung CLX-3180, CLX-3185, CLX-3186 Color Laser MFP – Replacing the Imaging Unit This document explains how to replace the imaging unit. When the life span of the imaging unit has expired, the Smart Panel program window appears on the computer, indicating the imaging unit needs to be placed. Otherwise, the printer might stop printing.