Do creosote sweeping logs really work?

Do Chimney Sweep Logs Work. Many homeowners wonder if the chimney sweep logs or creosote sweeping logs really work to clean out fireplace flues and get rid of creosote residue so that the fireplaces are safe to use. The short answer is no, they don’t work.

Where does creosote build up the most?

It is produced by combustion gases that are given off from burning wood. When the temperature in your flue is below 250 degrees Fahrenheit, these gases condense in your chimney and buildup along the lining of the flue. Since flue temperatures often dip below 250 degrees, creosote regularly builds up.

How often should you use a creosote log?

You don’t need to overdo it with your creosote logs. For the best results, you should use one log for every 60 fires. If you’re not sure how frequently you use your chimney, keep track of every fire. You might hit 60 fires in two months, or it could take longer.

Do you burn a creosote log by itself?

As you use your fireplace, the heat from the fires will then cause this creosote to break away from the wall of the chimney and fall back into the fireplace, in the form of small particles. Tests have shown that the burning of a single Creosote Sweeping Log can reduce this build-up by up to 60%!

Do potato peels clean chimneys?

Toss the potato peels carefully into a burning fireplace. The potato peels burn at high energy and will help push the soot and creosote out of the chimney.

What dissolves creosote?

Creosote is moderately soluble in water. Spraying water onto the creosote will help to remove the liquid. However, creosote is a type of oil that is never removed fully by water. Bleach and industrial cleaners will help to pull the creosote out of clothes and off of skin or other surfaces.

Does burning Aluminium cans clean your chimney?

One method to loosen crusty or tarry creosote so it flakes off and falls down into the firebox or fireplace is to burn aluminum cans in a very hot fire. While this method works, it does not clean the chimney of creosote completely, and chimney brush cleaning is still necessary.

Will burning rock salt to clean chimney?

Sodium Chloride Put a little salt in the fire while it is burning. The salt combines with the water in the burning wood to create a weak acid that travels up the chimney and dissolves small amounts of creosote.

Will vinegar remove creosote?

Then, wipe down the entire exterior surface with a solution made of two parts water, one part white vinegar and a squirt of dish soap (which you can also use to clean the glass). Climb a sturdy ladder onto the roof. Remove the chimney cap and scrape away creosote, ash and soot with a stiff-bristled chimney brush.

Does burning an aluminum can remove creosote?

Burning aluminum cans does not get rid of the creosote, it merely turns it to flakes and powder. It remains necessary to physically clean the chimney with the correct chimney brushes.

Do you need to use a creosote sweeping log?

The Creosote Sweeping Log will not tell you if your chimney is blocked or has any kind of structural damage. The Creososte Sweeping Log does not take the place of inspection and professional cleaning. Our personal favorite when it comes to high class woodstoves are JØTUL woostoves. It works! I use two of these logs through out the burning season.

How does the Pine Mountain creosote Buster fire log work?

FIREPLACE SAFETY: The Creosote Buster Fire log contains a specially formulated powder that when heated converts to a super penetrating gas to attack & breaks down creosote compounds in your chimney to remove dangerous creosote & help prevent chimney fires

How does CSL help dry out the creosote?

CSL has the active minerals that help dry out the creosote while you are enjoying a relaxing evening by the fire.

What happens to creosote when you burn wood?

Stage two creosote doesn’t simply brush away, but it can be removed. Restricted air is the burning attribute that best describes how stage two creosote is formed. Burning logs in fireplaces and wood stoves with glass doors typically results in this form of flammable creosote. Creosote in the third stage is by far the most difficult to clean.