How do you reprogram a Weiser door lock?

Weiser Lock reset:

1. Remove the battery cover using the Allen key.
2. Remove the battery pack.
3. Press and hold the program button while reinserting the battery pack.
4. Hold the program button for 30 seconds until the status LED flashes red.
5. Press the program button again.

What is the master code for a Weiser lock?

The lock is programmed with the default mastercode 0-0-0-0. Replace this with a code of your own. The mastercode must be 4-10 digits.

How do I change the combination on my Weiser Powerbolt?

It is recommended that you change it to a code of your own.

1. Make sure the lock is unlocked and the door is open.
2. Enter your Mastercode – for new install, default is 0-0-0-0.
3. Press the lock button. You will hear one beep.
4. Press 7.
5. Press the lock button.
6. Enter a new Mastercode.
7. Press the lock button.

How do you clear a Weiser lock code?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset.

How do you program a smart code door lock?

How do I program my SmartCode 913 lock?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep.

How do I reprogram my Weiser Smartcode 10?

2 Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. 4 After a few seconds, the lock will initiate the door handing process, and the latch bolt will extend and retract to learn the orientation of the door.

How do you remove a Weiser lock code?

While the door is open, test the user code to make sure it no longer unlocks the door. 2 Press Lock button once. 4 Press Lock button once. 3 Enter user code to be deleted.

How do you program a Weiser Powerbolt 1?

Make sure the door is open and unlocked. Press PROG -(for 30 seconds). You will hear 1 long beep….Note: Beeper is still active for “low battery” alarms.

1. Press PROG.
2. You will hear 2 long beeps.
3. Press7 8.
4. Press PROG.
5. You will hear 1 beep if successful. If unsuccessful, you will hear 3 short beeps. Repeat from step 1 slowly.

How do you program a Kwikset keypad deadbolt?

Can you re-key a Weiser mechanical deadbolt?

SmartKey Security TM also allows you to re-key the lock yourself in seconds, leaving lost or unreturned keys obsolete. Rigorous Testing. Proven Performance. Mechanical deadbolts provide the ultimate in security. They are simple to install and come in a large variety of price points, styles and finishes.

How to enter master code in Weiser Lock?

1. Keep door open. Press the Program button once. The keypad will fl ash green and you will hear three beeps. 2. Press Lock button once. 3. Enter Mastercode. 4. Press Lock button once. 5. Press “9” six times. 6. Press Lock button once. Procedure continued on next page 5 / 15 62810 / 01 USA: 1-800-677-5625 Canada: 1-800-501-9471 www.weiserlock.com

Is the Weiser elements keyless entry touchscreen electronic?

Elements Keyless Entry Touchscreen Electronic Deadbolt in Satin Nickel Upgrade to a more convenient, more controllable keyless entry deadbolt with Weiser’s Elements Touchscreen Electronic Deadbolt. With your own personal code, you can enter your home with a few simple pushes of a button and lock it in just one!

Is there a lifetime warranty for Weiser elements?

Lifetime mechanical and finish warranty. See warranty details at www.weiserlock.com or contact consumer services at 1-800-501-9471 Elements Keyless Entry Touchscreen Electronic Deadbolt in Satin Nickel Upgrade to a more convenient, more controllable keyless entry deadbolt with Weiser’s Elements Touchscreen Electronic Deadbolt.