What is an adjustable beam?

Springee’s brand new adjustable beam is designed for skills training and conditioning at home. Starting at 7” off the ground, the beam height can be adjusted all the way up to 24”. This beam is designed to last through the hard work your gymnast is going to put in.

How does a VW front beam work?

VW used double trailing arms mounted in twin front torsion spring housings in the front of their autos. There are four arms, two on either side of the beam which pivot at two ends: one side pivots within the beam which is bolted to the car, and the other side pivots at the spindle around a Linkpin or a Balljoint.

What is a narrowed beam VW?

narrowed beams are used to tuck the wheels in after you fit aftermarket wheels that are wider or dropped spindles as they add 1/2″ to each side as well as disk brake set ups, also another reason is if your lowering the car you will rub the outter fender (wheel arch) when turning fitting a narrowed beam will tuck the …

How do I lower my Ghia?

Drop Spindles: Drop spindles are another option for lowering your Ghia. Drop spindles are basically similar to a stock VW spindle, except the shaft portion that the brake/hub mounts too is positioned higher up, thus making the car sit lower. The problem with drop spindles is that the spindle shaft tends to be .

Why are VW front beams narrowed?

Narrowing the beam also stiffens up the suspension since the torsion leaves need to be shorter to fit in the beam.

How wide is a stock VW front beam?

VW Thru Rod, Stock Width Beam, 40.5 Inches Long, Pair. This product is made for custom applications.

Where do you cut Baja Bugs?

Use a Sawzall or angle grinder to cut off the rear apron (this is the rear bodywork below the engine bay of the vehicle).

What is a Baja Bug?

A Baja Bug is an original Volkswagen Beetle modified to operate off-road (open desert, sand dunes and beaches), although other versions of air-cooled Volkswagens are sometimes modified as well. Baja bugs often race in off road desert races such as the Baja 1000.

What are the different types of VW beams?

Roll Cages > Complete Bolt-on Beams We offer complete, narrowed and adjustable beams for all air-cooled Volkswagen applications – Type 1, Type 2 and Type 3. Multiple options available, including disc brake upgrades, drop-spindles, shortened tie rods and more.

What does an adjustable axle beam do for a VW?

Adjustable axle beam means that you can either maintain stock vehicle height, or lower the vehicle up to two inches. Does not fit Superbeetles. Aluminum caster shims correct and improve front end geometry on your lowered Volkswagen. Use longer bolts, EMPI 22-2816, for proper thread grip at pan head.

Can you lower the front end of a VW Beetle?

Adjustable axle beam allows you to lower your 1949-65 Volkswagen Beetle & Ghia front end up to 2 1/2″ from stock height! Unit made in Brazil. These are fully assembled remanufactured front beam assemblies.

How much does a modified German beam cost?

Modified German beam w/ narrowed torsions $470 2.5″ Drop spindles $120 Set of narrowed tie rods w/ ends (non-German) $86 Set of narrowed tie rods w/ ends (German) $162 Rebuilt control arms w/ new ball joints $155 Labor to assemble complete beam and brake kit $280 Brake Upgrade Options: CB Performance “wide 5” disc brakes w/ drop spindles $690