How do you cover air return vents?

Louvered Shutters. Much like the louvered doors, louvered shutters can be used to hide a return air vent without obstructing airflow. These can be hung over the return vent like a picture would be or secured to the wall with hinges allowing you to open and close the shutters when it’s time to replace your air filters.

Can a return vent be covered?

Keeping your cold air returns clear is the key to keeping your A/C system in great shape. Avoid covering your cold air return vents with curtains, drapes or rugs. Always check your air filters and replace them when needed. Clogged air filters can also cause cold air return blockages.

Can you have too many return air vents?

Having several return vents (ideally one in every room, but even two or three is better than just one) creates consistent air pressure. If you have one return vent, your home is fine. Keep the doors to each room open so air can properly circulate.

Should return air vents be open or closed in winter?

Adjust Return Registers for Winter It’s important to remember that hot air rises and cold air falls. In the winter you want the cold air to be drawn through the return registers leaving the hot air behind. By opening the lower registers and closing the top ones you keep hot air in and draw the cold air out.

What happens when you cover a return vent?

The most obvious effect of covering return vents is that the air can’t get back to the HVAC system. Covering even one return vent can throw off the system’s operation. The system needs to suck the air back into the furnace while it’s running, or it throws off the balance and pressure.

What is a HVAC return vent?

Return vents are connected to your return ducts, which pull air out of your indoor spaces to deliver to your heating and cooling system. They are typically larger in size. Return vents don’t have louvers.

Do all rooms need a return air vent?

Does Every Room Need Air Return Grilles? While it is a myth that air return grilles are required in each and every room in the house, it is definitely necessary to have more than one of these grilles installed at strategic places in the house. The most important place to have these would be the bedroom.

How big is a decorative return air vent grille?

Decorative Vent Cover, Grille, Return Register, Made of Urethane Resin, in French Style fits Over a 12”x 20” Duct Opening. Total Size, 14” x 22”, for Walls & Ceilings only (not Floors) (Antique Brass) . Usually ships within 6 to 10 days. . . Decorative Grille, Vent Cover, or Return Register.

Which is the best air grille and vent cover?

The air grille and vent cover selection from Grainger includes steel, metal and wood return air grilles and vent covers. Find a decorative metal floor register that will match your home or office decor, or go with a standard steel grille with white electro-coated and powder-coated finish.

Where do you put a return air grille?

Homes will either have multiple small grilles throughout or a single, large grille, installed in either ceilings or walls to cover the return vent. Decorative return air grilles are available in various finishes and materials to suit your style. Need to point incoming air in a certain direction?

What’s the difference between air return grilles and registers?

Know the Difference between air return grilles and Registers: chances are, you already know what these differences are; but, if you are inexperienced with HVAC installation, this is very important.