How to fix socket error 10053?

The first thing a user should do after encountering the 10053 message is temporarily disable the firewall and antivirus protection, and then attempt to make the connection again. It might be necessary to call a computer software company’s help line if socket error 10053 occurs often.

How to fix network socket error 10054?

Solution 1. Check Peer to Peer connection

1. Check if the address of the computer or host is correct.
2. Check the other computer or the host, if it is still on or disabled.
3. Make sure the network between you and the other computer is still up.
4. Check the network configuration of the other computer if it is unreachable.

What is socket error 10054?

Error 10054 occurs when the connection is reset by the peer application, usually due to an incorrect firewall configuration. Find more information about this error on Microsoft Development Center.

How do I fix socket Error 10013?

The error 10013 can be caused by the antivirus or firewall software. Basically, a needed socket connection is being denied….

1. Restart the windows firewall service.
2. Reboot the problematic machine.
3. Restart the “TCP/IP stack”.
4. Try to temporarily disable antivirus.

How do I fix socket Error 10061 refused?

10061 is a Connection Refused error sent to you by the server. You could not make a connection because the target machine actively refused it….Socket error = #10061

1. Highlight the site in the Site Manager.
2. On the menu bar, click File > Properties.
3. Click the Type tab.
4. Enter the correct port number in the Port text box.

What does socket error mean?

A “socket error” indicates that data sent over the network has not arrived in time. The easiest solution to fix this problem is to perform a factory reset and a firmware update. If the socket error prevails, then try to connect directly from your computer to your light. Open the TCP/IPv4 configuration on your computer.

What is the error code 10013?

A Socket Error 10013 can and will occur if there are settings on your computer that are not properly configured. In many instances it is an anti-virus software that will either not scan your computer properly or will take too long to scan them and thus prompt the error.

How do I fix socket error during upload test?

How to Fix: A Socket Error Occurred During the Upload Test [Partition Magic]

1. Fix 1: Enable Connected Devices Platform.
2. Fix 2: Pause OneDrive Syncing.
3. Fix 3: Add an Exception for SpeedTest in Your Antivirus.
4. Fix 4: Disable or Uninstall Your Third-Party Antivirus.
5. User Comments.

What causes socket error?

Socket errors can be caused by various issues including connectivity problems on the network, client or server computers or due to a firewall, antivirus or a proxy server. This error occurs when the socket connection to the remote server is denied.

What do I do if I get TFTP socket error?

Otherwise, you will get tftp://.. (socket error) Copying a boot IOS image file to USB memory stick CLI command. ex. copy tftp flash: or usbflash0: or usbflash1 / (wise-versa) copy running-config tftp or copy flash: tftp or copy usbflash0: tftp The PC/Laptop IP address [192.168.10.3] where the TFTP-Server running.

What does it mean to get socket error 10053?

Socket Error 10053 – An established connection was aborted by the software in your host machine. [PSCS Wiki] Socket Error 10053 – An established connection was aborted by the software in your host machine. Error 10053 means that an established connection has been dropped.

What does bind error 10013 mean in tftpd32?

TFTPD32 or TFTPD64 reports Bind error 10013 An attempt was made to access a socket in a way forbidden by its access permissions. Bind error 10013 An attempt was made to access a socket in a way forbidden by its access permissions.

Why is tftpd64 unable to transfer file to client?

Now when client request the file then i see below error in log viewer window of Tftpd64. Connection received from 2a01:7e00:e000:11c:3546:7805:766:7110 on port 61445 [23/06 11:50:44.967] Read request for file .