How do I reset my CyberQ WIFI?

Holding down all four arrow keys (UP, DOWN, LEFT, RIGHT) for approximately 5 seconds will reset all settings to factory defaults. The CyberQ Wi-Fi will then show RESETTING EEPROM and restart.

How do I connect my Ultraq to Wi-Fi?

Click on the Menu icon, located in the top left corner, and then select “ShareMyCook Login.” You must connect to ShareMyCook first and then you can connect to Wi-Fi. Note: After you log into ShareMyCook, the app will automatically prompt you to connect to your Wi-Fi network.

Does EGG Genius need wifi?

The setup screen (inside the app) for local mode comes up blank. I was only able to configure this for direct more (where your phone is connected directly to the WIFI of the egg genius) or in cloud mode; which requires INTERNET ACCESS to work!

Why is my green Egg not getting hot enough?

There is nothing more frustrating than going to cook a hot pizza or sear a steak and not being able to get your Big Green Egg (or Kamado Joe) up to temperature. The biggest culprit in only getting low temperatures is simply ash filled holes & grates from previous cooks.

How do I get my green Egg 500 degrees?

500-600º temps are easiest to maintain if the daisy wheel is off the egg. After lighting and having the fire get established, set the bottom vent to about 1/2″. Let the temp stabilize and note what it is. Then open the vent up a bit and watch the response of the temp.

Why is my EGG Genius not connecting?

If your Flame Boss® 400 or EGG Genius controller previously connected to your WiFi and no longer does, please check the following: If your controller is in Station mode and you have not recently performed a factory reset, try rebooting your WiFi router.

How does EGG Genius work?

The EGG Genius effortlessly controls the temperature of your EGG through your smartphone, tablet or computer. Remotely manage and monitor cooking temperatures for worry-free cooking and monitor the temperature of your food. You can also view graphs of your past cooks.

How to set up the cyberq Part II?

Press and hold down the UP and DOWN arrows together to enter SETUP mode. 2. When >SYTEM SETUP is displayed, push the RIGHT arrow. 3. Scroll down to >SCAN WIFI and push RIGHT arrow. 4. Scroll to your Wifi Network and then press the CENTER button. 5. Press the LEFT arrow to go backto WiFi Setup 6.

How does the cyberq cloud work on a BBQ?

Take the guesswork out of your next barbecue and attach the CyberQ Cloud to your grill. Using the up and down buttons, select your ideal cooking and food-ready temperatures. The high-tech device will simultaneously monitor your food’s internal temperature while maintaining the perfect ambient cooking temperature.

How do you set up WiFi in Windows 10?

1. Press and hold down the UP and DOWN arrows together to enter SETUP mode. 2. When >SYTEM SETUP is displayed, push the RIGHT arrow. 3. Scroll down to >SCAN WIFI and push RIGHT arrow. 4. Scroll to your Wifi Network and then press the CENTER button. 5. Press the LEFT arrow to go backto WiFi Setup 6.

What kind of fan does the cyberq cloud use?

The CyberQ Cloud is available with 2 fan sizes and can power and control 2 fans simultaneously to effectively move air through the grill with an available fan splitter. The Pit Bull fan is best to power and control large grills and smokers.