How do you read a Honda CEL code?

The codes can be read by bridging the two pins in the service connector and reading the MIL on the instrument cluster (all models). Vehicles 2000 onwards are fitted with a 16-pin diagnostic behind the centre console on the passenger side. A fault code reader is required to retrieve or clear codes via this connector.

What causes check engine light on Honda Civic?

Honda Civic Check Engine Light Flashing Other common reasons for a Check Engine Light are dirty mass airflow sensor, damaged oxygen sensor, faulty emissions control part, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name a few.

What are the codes for check engine light?

The most common diagnostic codes for check engine lights are:

• Codes: P0171 – P0175 → Deals with sensing your oxygen levels.
• Codes: P0300 – P0305 → Deal with engine misfires.
• Codes: P0411, P0440, P0442, P0446, P0455 → Deal with the evaporative system.
• Code: P0401→ Deal with exhaust gas recirculation.

How can I check my engine code without a code reader?

Flip your car’s ignition on and off a couple of times without cranking the engine and finish with the key in the on position. Your car will then check for any saved trouble codes. All the lights on the dash should light up until one remains on—usually the “service engine” light.

How do I find my engine code?

Find it in the lower corner of your windshield on the driver’s side. Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes.

How do I display check engine codes?

Inserting and Reading an OBD Scanner

1. Step 1: Locate your vehicle’s OBD port.
2. Step 2: Plug your OBD scan tool into the connector.
3. Step 3: Read the codes in the computer.
4. Step 4: Record the codes that display.
5. Step 1: Break down your code into sections.
6. The first section is the first character, which is always a letter.

What is the diagnostic code for a Honda check engine light?

Refer to our Generic OBD II code list for definitions on all other Honda diagnostic trouble codes. P1201 Cylinder 1 Misfire – Compare possible causes/symptoms for this Honda check engine light code to the Generic OBD II code P0301

When to reset the Check Engine light on Honda Civic?

Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002). The check engine light in your Honda offers important diagnostic information, which will alert you of a serious problem like a bad catalytic converter.

Where is the malfunction indicator light on a Honda Accord?

Should an engine management component fail, the incorrect (or implausible) signal is recognised by the PCM, which stores a Diagnostic Trouble Code (DTC), and where appropriate, illuminates the Malfunction Indicator Light (MIL)/Check Engine Light (CEL) in the instrument cluster.

What causes the Check Engine light to turn on?

A number of things can cause the check engine light to turn on. Sometimes it is not caused by a serious problem with your car. Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002).