What does the belt unit do in a Brother printer?

It is a rotating belt that is typically large which carries the mixture of different colors of toner particles. The cartridges will then precisely apply each toner layer to the belt which will then apply the combined layers uniformly onto the paper. You might need the belt unit to be replaced after some time of use.

How do you reset a belt unit?

Reset the Belt Unit Counter

1. Make sure the machine is turned on.
2. Press. (Settings).
3. Press All Settings => Machine Information or Machine Info. => Parts Life.
4. Press and hold Belt until the machine’s display message changes.
5. Press Yes.
6. Press. (Home).

How do I change the belt unit on my printer?

Replace Belt unit

1. Turn off the printer power switch.
2. Fully open the top cover by lifting up on the handle (1).
3. Take out all the drum unit and toner cartridge assemblies.
4. Hold the green handle of the belt unit and lift the belt unit up, then pull it out.
5. Unpack the new belt unit and put the new belt unit in the printer.

What does a printer belt do?

The transfer belt rolls the paper through the printer giving it a positive charge. As it passes the drum, the negatively charged toner is attracted to the page in the shape of your print. The toner is then melted to the paper by hot rollers called the fuser unit, and voila, your page is printed.

How do you change the belt on a Brother MFC l8850cdw?

Replace Belt

1. Press. (Settings).
2. Press All Settings.
3. Press the Up or Down arrow key to choose Machine info.. Press Machine info..
4. Press the Up or Down arrow key to choose Reset Menu. Press Reset Menu.
5. Press the Up or Down arrow key to choose Belt Unit. Press Belt Unit.
6. Read the message and press Yes.
7. (Home).

What does belt end soon mean on a printer?

If the LCD shows “Belt End Soon”, it means the belt unit is near the end of its life. Buy a new belt unit and have it ready before you get a “Replace Belt” message.

Can you reuse a brother waste toner box?

DO NOT reuse the waste toner box. Unpack the new waste toner box and install the new waste toner box in the machine. Make sure the waste toner box is level and fits firmly into place.

How do I know if my transfer belt is bad?

Printer Defects related to bad transfer belt

1. Registration errors.
2. Blurring print.
3. Spotting.
4. Color fringing.
5. Light or dark streaks on edges.
6. Faded Print.
7. Repeated defects.
8. Long Toner line on black polymer belt may mean the belt or wipe needs replacement.

What is transfer belt?

A gait belt is an assistive device which can be used to help safely transfer a person from a bed to a wheelchair, assist with sitting and standing, and help with walking around. It is secured around the waist to allow a caregiver to grasp the belt to assist in lifting or moving a person.

What is clean ITB?

Cleaning starts. When a message appears stating that cleaning is complete, press to return to the Home screen.

https://www.youtube.com/watch?v=_Co7K8KtZl4