What are the maintenance done on the mooring winch?

Ensure that all the brake drums and linings are suitably dried and clean of salt deposits. 2. Do Frequent Greasing of Moving Parts – All rotating parts of the mooring equipment, which would include rollers, fairleads, winch drums, deck stands etc. must be moved and lubricated on a frequent basis.

What are the two types of mooring winches?

Mooring winches

• – Automatic tension mooring winch, self-tension winch – Winches designed to heave-in automatically whenever the line tension falls below a certain pre-set value.
• – Manual tension mooring winch – Manual winch always requires a person to handle the controls for heaving or rendering.

What are the common problems encountered in mooring winch operation?

Common errors are the inadequate setting for winch breaks, inadequate maintenance of equipment and the condition of mooring decks (sharp edges etc).

What are the main components of a mooring winch?

The main parts of mooring winch includes a winch barrel or a drum, a warp end and a driving motor. Modern mooring winches comprises of elaborate designs with various gear assemblies, which can be electric, pneumatic or hydraulic driven.

What is the difference between winch and windlass?

The difference between a winch and a windlass is that the line wraps around and around the cylindrical portion of a winch; whereas the line goes into the forward end of the windlass, passes around the gypsy (cylinder/drum/pulley) and exits out the back (or bottom) of the windlass housing.

What is a winch on ship?

A winch is a mechanism used to reel in, to let out, or otherwise adjust the tension of a rope, wire, or cable. Boats and ships make use of multiple winches to handle halyards, sheets, as well as anchor or mooring lines. The basic mechanism consists of a spool or winch drum to wind in and store the line.

What is the difference between windlass and mooring winch?

How are the mooring winch categorized?

Windlass mooring winch can be categorized in different ways as follows: classified by drive type, there are electric mooring winch, hydraulic mooring winch and diesel mooring winch; classified by control type, there are mooring winches with automatic control and winches with manual tensioning control; classified by the …

How can you protect yourself from mooring operations?

Check All the Mooring Equipment: Check all the equipment (mooring winch, drums, windlass etc.) involved in the mooring operation for any kind of problem. Proper routine maintenance is the key to ensure smooth running of mooring equipment and systems. Don’t forget to check the load sensors of mooring winches.

What are the hazards when on mooring stations?

The following are known to have caused personal injury whilst mooring:

• Oil – slipping on oil from mooring equipment.
• Ice – even though the deck may be coated in an anti-slip coating, a layer of ice may be present that introduces a slip hazard.
• Ship side – be aware of leaning on or over ship side handrails or bulwarks.

What are the correct anchoring procedure?

1. Approach the anchor position heading into wind and tide with speed around 2 knots at 0.5NM from the position.
2. Lower the anchor with gear to around half shackle off the bottom and then hold the anchor on brake.
3. Give Stern movement to stop the vessel over the ground once the vessel is in the anchoring position.

Is windlass a pulley?

is that windlass is any of various forms of winch, in which a rope or cable is wound around a cylinder, used for lifting heavy weights while pulley is one of the simple machines; a wheel with a grooved rim in which a pulled rope or chain will lift an object (more useful when two or more pulleys are used together such …

What kind of maintenance is needed on a mooring winch?

The main shaft or gear shaft too may be checked for temperature rise to indicate lack of or less lubrication than required. Often windlass shaft is coupled with mooring winch and it is important to put the mooring winch brake ‘on’ and the clutch in disengage position for the winch before operating the windlass.

What should I do for a mooring deck?

Obtain power on deck. Ensure adequate lighting is required on mooring decks. An experienced winch operator must be used at all times and winches must be conditionally tended. Prepare winches, remove covers, put into gear and test operation.

Where can I find the underground winch maintenance manual?

No part of this manual may be reproduced or transmitted in any form or by any means, electronic, or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from Lindstrand Technologies Ltd, Maesbury Road, Oswestry, Shropshire, SY10 8HA, England LTL WOMM Issue 1.0 23/02/07 ii

What are the brakes on a marine windlass?

Brakes are provided with foundation plate welded to the deck. Often windlass shaft is coupled with mooring winch and it is important to put the mooring winch brake ‘on’ and the clutch in disengage position for the winch before operating the windlass.