What is Type B hot mix asphalt?

Class B. Dense-graded 5/8 inch HMA with at least 75 percent of the coarse aggregate having at least one fractured face. Its primary use is as a leveling course or surface course because its nominal maximum aggregate size provides a good compromise between offering a smooth surface texture and low rut potential.

What is i5 asphalt?

The I-5 or top is commonly used for homeowners and businesses. I-4 or Commercial top consist of a mixture of ¾ inches of stone and is used when added stability ans strength is needed for the asphalt. The oil content is added to the mixture to combine, then applied to the area for the asphalt driveway.

What are 3 types of asphalt?

To give you a better understanding of the different types of asphalt available, we’ve outlined five of the most common types of asphalt pavement used.

• Hot Mix Asphalt.
• Warm Mix Asphalt.
• Cold Mix Asphalt.
• Dense-Graded Mixes.
• Porous Asphalt.

What is Type A HMA?

Type A hot mix requires that at least 90% of the coarse aggregate and 70% of Fine aggregate used contains crushed particles while Type B hot mix only requires 25% and 20% respectively. Many other indicators of Aggregate and HMA quality are distinguished this way.

What is Type 3 Binder asphalt?

NYSDOT Type 1 Base and Type 3 Binder Mixes Base and Binder Mixes are a coarser grade of blacktop containing a higher percentage of larger stones. These larger stones increase in stability when added to the asphalt mix and also raises the load factor the surface can endure before breaking or cracking.

What is Type 6 blacktop?

Type 6 asphalt contains slightly larger stone, so it provides more strength but is not quite as smooth as Type 7. Once Sealcoated it is difficult to distinguish the difference in the textures.

Is 2 inches of asphalt enough for a driveway?

For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.

What is Type 1 asphalt?

Asphalt Bulk Liquid, BaggED, and Kegged Available in Bulk Liquid IKO Type I asphalt is an oxidized bitumen intended for use with organic felts, insulation and coverboards for slopes of 0 – 1 1/2:12 (0-12%). This asphalt conforms to all requirements of CSA specification A123.4-M, Type I, and UL55A.

What is Type 3 binder asphalt?

What is blacktop binder?

The asphalt binder, sometimes referred to as the asphalt cement binder or the asphalt cement, is an essential component of asphalt concrete—it is as the name implies the cement that holds the aggregate together.

What is Type 7 blacktop?

Type 7 asphalt contains fine stone and dust which has a very smooth finish. Type 6 asphalt contains slightly larger stone, so it provides more strength but is not quite as smooth as Type 7.

What is 6F Top asphalt?

There are many different types of asphalt used for paving. The most common are Binder and 7F fine topcoat. However, a new trend in commercial paving is to use what is called a 6F material which is a combination of the Binder and 7F fine topcoat. Contact us today to discuss your commercial asphalt paving needs.

https://www.youtube.com/watch?v=ANGpiwbkfAE