Are Dream Maker Spas any good?
Are Dream Maker Spas any good?
Overall, I’ve been very happy with the EZ Spa. It’s a great, reliable hot tub and (with the exception of the cover) everything has worked perfectly. It’s also very easy to use, so I’d definitely recommend it as a good first hot tub, or for anyone looking for a spa that isn’t too complicated.
What Is a Dream Maker spa?
Dream Maker Spas are rotationally molded for a unibody construction that creates an elegant durable finish guaranteed not to split, peel, rot or rust.
How long does it take a Dream Maker spa to heat up?
From the moment your spa is plug in, it is automatically pre-set to operate until it reaches 100°F. This process could take up to 20 hours depending on the initial water temperature.
How many gallons does a Dream Maker spa hold?
314 Gallons
314 Gallons / 1189 Litres Capacity. 25 Adjustable Flow Stainless Steel Jets. 416 lbs. / 187 kg Dry Weight. Proprietary Digital Controls.
How do you reset a dream machine Spa?
With the product operating depress the “test” button on the GFCI the spa should not operate. Depress the “reset” button on the GFCI. The product should now operate normally.
What does oh On a hot tub mean?
overheat
OH, OHH or OHS (overheat) all mean that a temperature sensor has detected unsafe water temperatures of 108° – 118° F, and your spa is in an emergency cool down mode. The heater is shut off, and the circulation pumps and blower are turned on to help dissipate heat.
What does F4 mean on a hot tub?
daily filtration
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| F4 | 8 hours daily filtration; system message, not an error |
| F6 | 12 hours daily filtration; system message, not an error |
| F | Fahrenheit, used to indicate panel is in Fahrenheit mode |
| FB-ER | Fiber optic error; accent lighting |
How do I drain my Dream Maker Spa?
Turn power off to the spa.
- Remove the access door (Fig 1A) and locate the drain valve (Fig 2).
- Assure that the drain valve is in the off position (as shown in Fig 2).
- Route the garden hose to a sewer drain capable of safely assimilating 300 plus gallons (1135 liters) of water which.
Why is my Dream Maker Spa not heating?
Heat and Jets Low or no heat may be the result when the filter is dirty or the jets are not fully open. Clean the filter and open the jets to test whether the heat problem resolves. If the jets won’t come on or if you notice no air bubbles, check that the power is turned on and the jets are fully open.
How do I stop my hot tub from overheating?
Here, we’ll show you four handy tips you can use to make sure your hot tub runs smoothly and stays cool, even on the most sweltering days: Turn down the temperature. Add cool water….Add some shade.
- Turn Down the Temperature.
- Add Cool Water.
- Don’t Run Your Filter When It’s Hot.
- Add Some Shade.
Why is my hot tub hotter than setting?
A simple cause of hot tub overheating is the hot tub’s temperature may be set too high. So, if the hot tub is set to filter too many hours per day, it can cause overheating. Adjust your filter cycle duration cycle down and set it to run early AM and late PM, when the outside temperatures are coolest.
What does PR stand for on my hot tub?
Pr or PRIMING MODE TAKES 4 MIN Message The Spa is Operating in “Priming” (Pr) Mode. The Spa has just been powered up and is in Priming Mode for 4 Minutes. Pumps and Blower can be turned ON and OFF to remove any Air from the Heater.