Can a 383 stroker handle nitrous?

What we liked about the power-adder ready 383 from BluePrint was that we didn’t have to worry about whether the stroker was stout enough to handle the shots of nitrous. After installation of the Zex Perimeter Plate nitrous system, the power output jumped to 516 hp with 75hp jetting and 572 hp with 100hp jetting.

How much horsepower can u get out of a 383 stroker?

That combo would probably make around 465 hp and nearly 500 lb-ft, but at less rpm. But never mind that. The point here is 502 lb-ft at 4,700 rpm and 500-plus horsepower from 5,700-6,200 rpm….Hot Rod’s Proven Recipe For A Simple Chevy 383 That Knocks Down 500 HP And 500 LB-FT.

Can you put a supercharger on a 383 stroker?

Add a Supercharger to a Well-built 383 and Get a Real Boost in Performance. Today it’s not uncommon to see superchargers finding their way onto just about anything short of a lawnmower. Blower companies offer bolt-on kits for virtually every application, be it an EFI-induced late-model or a carburetor-fed classic.

How fast is a 383 stroker engine?

The stroke increases the rod main’s centerline diameter. The rod and piston have to travel in a larger diameter in the same engine rpm. This increases the piston speed, which makes the stroker pull more air at a lower engine rpm. A 383 has the same piston speed at 2,500 rpm that a 350 has at 3,100 rpm.

Is a 383 stroker worth it?

Well-worth it for the added low-end torque, a mild 383 build is less than $200 more to put together than a 350. They’re so common now it seems hardly anyone builds up a 350 block without putting in a 3.75″ stroke crank.

What do I need to turn my 350 into a 383 stroker?

How to Convert a 350 Into a 383 Stroker

1. Purchase and install a 383 stroker crankshaft, rod and 10.5-to-1 piston set.
2. Install a set of four-bolt steel main caps over the center two crankshaft mains if you’re using a two-bolt-main block.
3. Install a set of ported L31 Vortec cylinder heads.

What should the power level be on a 383 drag engine?

I agree with the 210 AFR recommendation. The 195s make great power on a mild 383, but with the 12:1 compression and more aggressive cam, you might as well turn it up with the bigger heads. thanks for the replies all. i feel a realistic target is 500-525 but my buddy thinks it should be closer to 600.

How much horsepower does a 383 CID Chevy engine have?

On the dyno, using smaller headers, the 383 cid small block Chevy engine produced 565 horsepower and 570 ft.-lbs. of torque. “That’s really good for 383 cubic inches,” he says. “We put the engine in the car last weekend.” Engine of the Week is sponsored by PennGrade Motor Oil, Elring – Das Original and Scat Crankshafts.

What kind of roller do I need for a 383?

Edelbrock has done the work, and the dyno testing, for us. We selected the Edelbrock Hydraulic Roller #2201 which makes 435 dyno-verified horsepower with our Edelbrock E-Tec 170 heads. With the 383, we wanted a solid timing chain that was beefier than the stock setup, and one name immediately came to mind: Cloyes.

What happens if you blow a 383 Stroker?

Blown 383 Stroker Has Trouble on the Dyno, What Happened? – Engine Power S7, E4 – YouTube

https://www.youtube.com/watch?v=b8hEEdWcOBc