How to fix Odin can t open serial com port?

Uninstall Samsung drivers and install the newest kies again to reinstall them. Don’t need to uninstall kies , just be sure all its processes are killed in your PC task manager. There’s nothing you can do until your phone and Odin are communicating. Try another cable, try another USB port on your computer.

Why is Odin not detecting my phone?

It is possible that your USB port may be damaged so try another port when connecting your device. Odin is extremely sensitive to data qualities so a lack of transfer quality may mean that Odin fails to recognize your device. It is recommend that you use the USB port on your computer instead of a USB slot.

How do I fix Odin connection?

for the best results:

1. use an official Samsung cable.
2. unplug all unneeded usb devices.
3. reboot into download mode again.
4. connect to a usb 2.0 port on the back of the pc.
5. run odin as an admin.

How do I connect to Odin?

1. Step 1Find Odin Firmware Files. If you’re looking for the actual firmware you need to flash, it can sometimes be difficult to locate online.
2. Step 2Extract the Firmware Files.
3. Step 3Install the Right Drivers.
4. Step 4Install Odin on Your PC.
5. Step 5Put Your Phone in Download Mode & Connect to PC.
6. Step 6Flash the Firmware Files.

Why is Odin failing?

The most likely reason as to why Odin flash failed is because of the firmware (ROM) that you are attempting to flash onto your Samsung. This is because there are a few issues that could be wrong with the firmware.

How long does it take for Odin mode to download?

Usually, the Odin mode should finish flashing whatever it is in under half an hour. If it takes longer than this, then the mode is probably stuck on your phone and you need to do something about it.

What is the use of Odin mode?

Odin is a Windows-based program that automates the process of flashing firmware to Samsung’s Android-based devices. It’s not intended for consumers: the tool is meant for Samsung’s own personnel and approved repair centers.

What is Download mode for?

Since firmware is basically the core system of your device, you cannot install it while your phone is already running the system. Therefore, you can put your phone into the Download mode, which does not load the main core system, and then you can flash the custom ROM or firmware of your choice on your device.

How do I fix failed Odin?

4 Tips to Fix ‘Odin Flash Fail’

1. Tip 1. Install the Latest Version of Odin.
2. Tip 2. Check the Firmware.
3. Tip 3. Physical Issues.
4. Tip 4. Try Fixppo Repair Tool (Recommended Method)

Why does Odin say can’t open serial ( COM ) port?

However, when i boot into recovery mode and connect phone to pc and open odin and start it ,it shoes cant open the serial (com) port. I have installed drivers but i cant connect my phone to pc when odin mode is on in phone but i can connect phone to pc when bootloader is on or recovery mode is on .

How to get a COM port recognised in Odin?

Check the boxes are ticked correctly, and hit Start Button. Takes about 3 mins, and you will see a green progress bar rising above COM Port mapping in Odin. Wait for your phone to reboot, about (2 mins) with No Sim message. Odin should say PASS! Close Odin. Wait for phone to boot to home screen, then power off phone and insert SIM & SD.

Why did my Odin Flash not work on my Samsung?

Check the Firmware The most likely reason as to why Odin flash failed is because of the firmware (ROM) that you are attempting to flash onto your Samsung. This is because there are a few issues that could be wrong with the firmware.

How can I connect my Android phone to Odin?

Power off phone. Remove SIM and SD and USB cable from Phone. (leave it connected to PC) Start Odin. On the right hand side windows Select these files. Might take a couple of tries. Wait till you see Downloading Screen, come up. Now connect Phone to USB. If Odin does not detect phone, unplug phone USB and try again.