Why is the power light blinking on my Sharp TV?

Reset and Updates Plug the television directly into the wall to rule out a bad power strip. Turn the TV back on and check the light. If the light continues to flash, run a factory reset to delete stored data and return the television to its original factory settings. To run a factory reset, unplug the power again.

What does OPC mean on my Sharp TV?

Optical Picture Control
When the TV is set to “On Display”, the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness; this will also display the green leaves on the LCD display.

How do you fix a blinking green light on a Sharp TV?

Unplug set, press and hold (on set) volume-down and channel-down and hold them while pluging in set. Will come on with “k” on screen, or will crash again if backlight bad. If it stays on, use your remote and arrow right then look for “fact init” and any other reset and turn them on.

Is the OPC light on my sharp TV working?

Sharp TV doesn’t work and shows blinking power and OPC light. What can this be? My sharp Aqous 52″ LC52D64U… My sharp Aqous 52″ LC52D64U had blinking power and opc lights.

Why does my sharp lc32sb23u light blink?

My Sharp LC32SB23U is experiencing a similar issue in which the picture automatically shoots up to the maximum brightness level and the set just shuts off. After that, the power light and OPC lights begin to blink. I’ve been able to solve the problem temporarily multiple times now, but I want a permanent solution using as little cash as possible.

What is the blinking pattern on sharp TV?

The pattern is 2 blinks for the power and one blink opc light. There are no sound, no pictures. When you press the power bottom, you will hear a click sound. Can anyone help me?

Why does the OPC light blink in a pattern?

The Power Light And The Opc Light Blink In A Pattern On My Sharp Aquos 42 Inch Lcd. It Won’t Turn On And When You Push The Power Button It ‘Clicks’ And Then The Pattern Resumes. Any Ideas? I wish someone would get the answer to this question, because I haven’t had this problem until I started using the HDMI port.