How much does it cost to sharpen figure skates?

Here’s how it adds up: Skates alone can cost up to $2,000 per pair. Blades need to be sharpened every few weeks, which costs $30 to $40 at a time.

Can figure skates be sharpened?

The most important thing you need to know about sharpening is that figure skating blades can be sharpened with a different measure of the radius of hollow (ROH). The radius of hollow has an effect on speed, grip, and how sharp your skates are going to feel when you are skating.

How often do figure skaters sharpen their skates?

every 15-20 hours
The rule of thumb is to sharpen ice skates after every 15-20 hours of use. This is typical for athletes who play hockey or figure skate multiple times on a weekly basis.

Do I need to sharpen new figure skates?

New skates are not sharpened, so you will need to get them sharpened by a trained sharpener, and then re-sharpened every 15-20 hours of ice time – to keep them in tip top condition by removing knicks and deformaties in the metal edge.

How often should I sharpen my figure skates?

The rule of thumb is to sharpen ice skates after every 15-20 hours of use. This is typical for athletes who play hockey or figure skate multiple times on a weekly basis. This consensus is based on a few factors:

How often to sharpen skates?

Sharpen your skates when they begin to feel dull and lose their edge. For active skaters, this could be as often as every two weeks. Check that your skates are even in the jig by placing a burr stone perpendicular across the blades.

Where to get skates sharpened?

You can get your skates sharpened at most sporting goods stores that sell hockey equipment. Most stores sharpen new skates for free when you’ve bought them at the store. In sum, new pairs of skates do not come sharpened (unless request). The first skate sharpening after you buy them is also critical to their effectiveness on the ice.

How do you sharpen hockey skates?

Hockey skates are sharpened with round-edged grinding wheels. Skates are sharpened by grinding out a semi-circle “hollow” in the blade. This process actually leaves the blade with two sharp outer edges, and a hollow space between.